User's Manual

Veri-Series Setup Guide
© Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18
19
g. Change desired parameters. Typical changes are:
i. Communication Tab: Network ID (default is 0, but each
unit must have a unique ID number such as 1, 2, 3, 4, etc.)
ii. Wiegand Tab: Wiegand parameters
NOTE: We do not recommend changing the Aux. port Baud rate at this
time.
4. Repeat steps 2-4 (skipping 3a) for the next reader until all readers are
configured.