User's Manual

Page 14

Device Hook-up (V-Prox/V-Flex/V-Pass/V-Smart)

The readers are connected to other components of an integrated system through

the pig-tail wire bundle that protrudes from the rear of the unit. This wire bundle is

made up of the connections described in Table 2.

PIN SIGNAL COLOR

Pigtail Jacket Blue

1 Wiegand Data0 Out Green

2 Wiegand Data0 In Green/White

3 Wiegand Data1 Out White

4 Wiegand Data1 In White/Black

5 Line Trigger Gray

6 Wiegand Ground Black/White

7 RS-485 (-) Blue/Black

8 RS-485 (+) Blue

9 RS-232 (Tx)

*N/A on V-Smart

Violet

10 RS-232 (Rx)

*N/A on V-Smart

Violet/White

11 Power Ground Black

12 RS-232 Signal Ground Black/Red

13 Power In

8-12VDC - V-Smart

6-24VDC - all others except

V-Station

Red

14 5 VDC output

*N/A on V-Smart

*No-connect for MV1200

based units

Red/White

15 Earth Ground

Green/Yellow