User's Manual

MOUNTING
Part # 430-00186-00 ©Copyright 2007, Bioscrypt Inc.
PIV-Station Installation Guide All rights reserved.
21
Use the following procedure. Mounting is shown in Figure 11 below (V-Pass FX mount shown but procedure is
same).
1. Align reader body with wall plate.
2. Slide reader body down, locking tabs into wall plate.
3. Set reader body in place with Phillips-head #4-40 screw.
4. Attach Aux. port door to bottom of reader with a twisting motion.
5. Secure door to reader with pin-in-hex #6-32 screw.
6. Secure reader to bracket with second pin-in-hex #6-32 screw on bottom right.
Figure 11: Mounting Procedures