User's Manual

USER INTERFACE

Figure 18: Position Finger on Sensor

5. Lower the finger onto the sensor and apply moderate pressure as if pressing a computer key. Too

much pressure may cause smudging of the fingerprint. Too little pressure may not allow the sensor to

recognize the presence of a finger.

Figure 19: Apply Correct Pressure

6. Keep the finger on the sensor until the top LED turns green.

Figure 20: Wait for Green LED

7. Lift the finger up and off the sensor.

Figure 21: Lift Finger Up and Off Sensor

8. Have the user practice this a few times before enrollment so that they can have a feel for how they

should use the reader on a daily basis. The goal is to have consistent placement so the PIV-Station

Reader sees approximately the same information each time.

1.2. Proper Finger Orientation