A780L M2G+/A780L M2L+/A780L Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Contents Chapter 1: Introduction ............................................................ 1 1.1 Before You Start ................................................................................ 1 1.2 Package Checklist ............................................................................. 1 1.3 Motherboard Features...................................................................... 2 1.4 Rear Panel Connectors ..................................................................... 3 1.
A780L M2G+/A780L M2L+/A780L CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU START Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: 1.2 Prepare a dry and stable working environment with sufficient lighting. Always disconnect the computer from power outlet before operation.
Motherboard Manual 1.3 MOTHERBOARD FEATURES SPEC Socket AM2+ AMD Sempron / Athlon / Athlon II / Phenom CPU / Phenom II processors Maximum Watt: 95W (A780L M2G+/ A780L M2L+) AMD 64 Architecture enables 32 and 64 bit computing Supports Hyper Transport 3.0 Maximum Watt: 125W (A780L) FSB Chipset Support HyperTransport 3.0 Supports up to 3.
A780L M2G+/A780L M2L+/A780L SPEC Back Panel I/O Board Size Special Features Front Panel Connector x1 Supports front panel facilities Front Audio Connector x1 Supports front panel audio function S/PDIF out Connector x1 Supports digital audio out function CPU Fan Header x1 CPU Fan power supply (with Smart Fan function) System Fan Header x1 System Fan Power supply CMOS clear Header x1 Restore CMOS data to factory default USB Connector x2 Each connector supports 2 front panel USB ports P
Motherboard Manual 1.5 MOTHERBOARD LAYOUT CPU_FAN1 KBMS1 ATXPWR2 D IM M A 1 A M 2+ DVI 1 D IM M B 1 S oc k et VG A 1 ATXPWR1 USB1 BA T T E R Y JUSBV1 AMD RS780L AUDIO1 ID E1 RJ45USB1 F_AUDIO1 PEX16_1 B IO S LAN PCI1 Super I/O JSPDIFOUT1 JCMOS1 PCI2 SATA4 SATA3 F_USB1 FDD1 F_USB2 JUSBV2 Codec J_COM1 J_PRINT1 (A780L M2G+ Only) Note: ■ represents the 1st pin.
A780L M2G+/A780L M2L+/A780L CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Step 1: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle. Step 2: Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle. The CPU will fit only in the correct orientation.
Motherboard Manual Step 3: Hold the CPU down firmly, and then close the lever toward direct B to complete the installation. Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the CPU_FAN1. This completes the installation. Note: Please update the BIOS to the latest version while using AM2+/AM3 CPUs. Due to the latest CPU transition, you may encounter the situation that the new system failed to boot while using new AM2+/AM3 CPUs.
A780L M2G+/A780L M2L+/A780L 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different due to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
Motherboard Manual 2.3 INSTALLING SYSTEM MEMORY DI M M A 1 DI M M B 1 A. Memory Modules 8 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.
A780L M2G+/A780L M2L+/A780L B. Memory Capacity DIMM Socket Location DDR2 Module DIMMA1 256MB/512MB/1GB/2GB/4GB DIMMB1 256MB/512MB/1GB/2GB/4GB Total Memory Size Max is 8GB. C. Dual Channel Memory installation Please refer to the following requirements to activate Dual Channel function: Install memory module of the same density in pairs, shown in the table. Dual Channel Status DIMMA1 DIMMB1 Disabled O X Disabled X O Enabled O O (O means memory installed, X means memory not installed.
Motherboard Manual 2.4 CONNECTORS AND SLOTS FDD1: Floppy Disk Connector The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. 2 34 1 33 IDE1: Hard Disk Connector The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality.
A780L M2G+/A780L M2L+/A780L ATXPWR1: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. Pin 13 14 15 16 17 18 19 20 21 22 23 24 Assignment +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground 12 24 1 13 Pin 1 2 3 4 5 6 7 8 9 10 11 12 Assignment +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.3V ATXPWR2: ATX Power Source Connector Connecting this connector provides +12V to CPU power circuit.
Motherboard Manual PEX16_1: PCI-Express Gen2 x16 Slot - PCI-Express 2.0 compliant. Maximum theoretical realized bandwidth of 8GB/s simultaneously per direction, for an aggregate of 16GB/s totally. PCI-Express supports a raw bit-rate of 5.0Gb/s on the data pins. 2X bandwidth over the PCI-Express 1.1 architecture. PEX16_1 PCI1~PCI2: Peripheral Component Interconnect Slots This motherboard is equipped with 2 standard PCI slots.
A780L M2G+/A780L M2L+/A780L CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DETAIL SETTINGS PANEL1: Front Panel Header This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.
Motherboard Manual F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel These headers allow user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader. Pin 1 2 3 4 5 6 7 8 9 10 F_ USB1 F_ USB2 2 10 1 9 Assignment +5V (fused) +5V (fused) USBUSBUSB+ USB+ Ground Ground NC Key JCMOS1: Clear CMOS Header Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and the CMOS data.
A780L M2G+/A780L M2L+/A780L F_AUDIO1: Front Panel Audio Header This header allows user to connect the front audio output cable with the PC front panel. This header allows only HD audio front panel connector; AC’97 connector is not acceptable. 9 1 10 2 Pin 1 2 3 4 5 6 7 8 9 10 Assignment Mic Left in Ground Mic Right in GPIO Right line in Jack Sense Front Sense Key Left line in Jack Sense JSPDIFOUT1: Digital Audio-out Connector This connector allows user to connect the PCI bracket SPDIF output header.
Motherboard Manual J_PRINT1: Printer Port Connector This header allows you to connector printer on the PC. 2 1 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 Assignment 25 Pin 14 15 16 17 18 19 20 21 22 23 24 25 26 -Strobe -ALF Data 0 -Error Data 1 -Init Data 2 -Scltin Data 3 Ground Data 4 Ground Data 5 Assignment Ground Data 6 Ground Data 7 Ground -ACK Ground Busy Ground PE Ground SCLT Key J_COM1: Serial port Connector (A780L M2G+ Only) The motherboard has a Serial Port Connector for connecting RS-232 Port.
A780L M2G+/A780L M2L+/A780L JUSBV1/JUSBV2: Power Source Headers for USB Ports Pin 1-2 Close: JUSBV1: +5V for USB ports at USB1/RJ45USB1. JUSBV2: +5V for USB ports at front panel (F_USB1/F_USB2). Pin 2-3 Close: JUSBV1: +5V STB for USB ports at USB1/RJ45USB1. JUSBV2: +5V STB for USB ports at front panel (F_USB1/F_USB2).
Motherboard Manual CHAPTER 4: RAID FUNCTIONS 4.1 z OPERATING SYSTEM Supports Windows XP Home/Professional Edition, and Windows Vista. 4.2 RAID ARRAYS RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1: RAID 1 defines techniques for mirroring data. RAID 1+0: RAID 1+0 combines the techniques used in RAID 0 and RAID 1. 4.
A780L M2G+/A780L M2L+/A780L RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure.
Motherboard Manual RAID 1+0: RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 1+0 solution for improved resiliency, performance and rebuild performance. Features and Benefits - - Drives: Minimum 4, and maximum is 6 or 8, depending on the platform. Benefits: Optimizes for both fault tolerance and performance, allowing for automatic redundancy. May be simultaneously used with other RAID levels in an array, and allows for spare disks.
A780L M2G+/A780L M2L+/A780L CHAPTER 5: USEFUL HELP 5.1 DRIVER INSTALLATION NOTE After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.
Motherboard Manual 5.2 SOFTWARE Installing Software 1. Insert the Setup CD to the optical drive. The drivers installation program would appear if the Autorun function has been enabled. 2. Select Software Installation, and then click on the respective software title. 3. Follow the on-screen instructions to complete the installation. Launching Software After the installation process, you will see the software icon “eHOT Line” / “BIOS Update” appears on the desktop.
A780L M2G+/A780L M2L+/A780L After filling up this information, click “Send” to send the mail out. A warning dialog would appear asking for your confirmation; click “Send” to confirm or “Do Not Send” to cancel. If you want to save this information to a .txt file, click “Save As…” and then you will see a saving dialog appears asking you to enter file name. Enter the file name and then click “Save”. Your system information will be saved to a .txt file. Open the saved .
Motherboard Manual BIOS Update BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system. AWARD BIOS Show current BIOS information Clear CMOS function (Only for AWARD BIOS) Save current BIOS to a .bin file Update BIOS with a BIOS file Once click on this button, the saving dialog will show. Choose the position to save file and enter file name. (We recommend that the file name should be English/number and no longer than 7 characters.
A780L M2G+/A780L M2L+/A780L Before doing this, please download the proper BIOS file from the website. For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first. Then click Update BIOS button, a dialog will show for asking you backup current BIOS. Click Yes for BIOS backup and refer to the Backup BIOS procedure; or click No to skip this procedure.
Motherboard Manual 5.3 EXTRA INFORMATION CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3.
A780L M2G+/A780L M2L+/A780L BIO-Flasher BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive or floppy disk. The BIO-Flasher is built in the BIOS chip. To enter the utility, press during the Power-On Self Tests (POST) procedure while booting up. Updating BIOS with BIO-Flasher 1. Go to the website to download the latest BIOS file for the motherboard. 2. Then, save the BIOS file into a USB pen drive or a floppy disk. 3.
Motherboard Manual 5.4 TROUBLESHOOTING Probable 1. There is no power in the system. Power LED does not shine; the fan of the power supply does not work 2. Indicator light on keyboard does not shine. System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running. System does not boot from a hard disk drive, but can be booted from optical drive. Solution 1. 2. 3. Make sure power cable is securely plugged in. Replace cable. Contact technical support.
A780L M2G+/A780L M2L+/A780L This page is intentionally left blank.
Motherboard Manual APPENDIX: SPEC IN OTHER LANGUAGES GERMAN Spezifikationen Sockel AM2+ AMD Sempron / Athlon / Athlon II / Phenom/ CPU Phenom II Prozessoren Maximales Watt: 95W (A780L M2G+/ A780L M2L+) Die AMD 64-Architektur unterstützt eine 32-Bit- und 64-Bit-Datenverarbeitung Unterstützt Hyper Transport 3.0 Maximales Watt: 125W (A780L) FSB Chipsatz Unterstützt HyperTransport 3.0 mit einer Bandbreite von bis zu 3.
A780L M2G+/A780L M2L+/A780L Spezifikationen Onboard-Ans chluss Rückseiten-E /A Platinengröß e Sonderfunkti onen OS-Unterstü tzung Diskettenlaufwerkanschluss x1 Jeder Anschluss unterstützt 2 Diskettenlaufwerke IDE-Anschluss x1 Jeder Anschluss unterstützt 2 IDE-Laufwerke SATA-Anschluss x4 Jeder Anschluss unterstützt 1 SATA-Laufwerk Fronttafelanschluss x1 Unterstützt die Fronttafelfunktionen Front-Audioanschluss x1 Unterstützt die Fronttafel-Audioanschlussfunktion S/PDIF Ausgangsanschluss x
Motherboard Manual FRENCH SPEC Sockel AM2+ Processeurs AMD Sempron / Athlon / Athlon II / UC Phenom/ Phenom II L'architecture AMD 64 permet le calcul 32 et 64 bits Watt maximum : 95W (A780L M2G+/ Prend en charge Hyper Transport 3.0 A780L M2L+) Watt maximum : 125W (A780L) Bus frontal Chipset Prend en charge Hyper Transport 3.0 jusqu'à une bande passante de 3.
A780L M2G+/A780L M2L+/A780L SPEC Connecteur de disquette x1 Connecteur IDE x1 Connecteur SATA x4 Connecteur du panneau avant x1 Connecteur Audio du panneau avant x1 Connecteur de sortie S/PDIF Connecteur embarqué x1 Embase de ventilateur UC x1 Embase de ventilateur système x1 Embase d'effacement CMOS x1 Connecteur USB x2 Connecteur d'alimentation x1 Chaque connector prend en charge 2 lecteurs de disquettes Chaque connecteur prend en charge 2 périphériques IDE Chaque connecteur prend en
Motherboard Manual ITALIAN SPECIFICA Sockel AM2+ Processori AMD Sempron / Athlon / Athlon II / CPU Phenom / Phenom II Watt massimo: 95W (A780L M2G+/ A780L M2L+) L’architettura AMD 64 abilita la co mputazione 32 e 64 bit Supporto di Hyper Transport 3.0 Watt massimo: 125W (A780L) FSB Chipset Supporto di HyperTransport 3.0 fino a 3.2 GT/s di larghezza di banda AMD RS780L AMD SB710 Interfaccia LPC (Low Pin Count) ITE 8718F Super I/O Fornisce le funzionalità legacy Super I/O usate più comunemente.
A780L M2G+/A780L M2L+/A780L SPECIFICA Connettore floppy x1 Ciascun connettore supporta 2 unità Floppy Connettore IDE x1 Ciascun connettore supporta 2 unità IDE Connettore SATA x4 Ciascun connettore supporta 1 unità SATA Connettore pannello frontale x1 Supporta i servizi del pannello frontale Connettore audio frontale x1 Supporta la funzione audio pannello frontale Connettore output S/PDIF x1 Supporta la funzione d’output audio digitale Collettore ventolina CPU x1 Connettori Collettore ve
Motherboard Manual SPANISH Especificación Conector AM2+ Procesadores AMD Sempron / Athlon / Athlon II/ CPU Phenom/ Phenom II La arquitectura AMD 64 permite el procesado de 32 y 64 bits Vatio máximo: 95W (A780L M2G+/ Soporta las tecnologías Hyper Transport 3.0 A780L M2L+) Vatio máximo: 125W (A780L) FSB Admite HyperTransport 3.0 con un ancho de banda de hasta 3.
A780L M2G+/A780L M2L+/A780L Especificación Conector disco flexible X1 Cada conector soporta 2 unidades de disco flexible Conector IDE X1 Cada conector soporta 2 dispositivos IDE Conector SATA X4 Cada conector soporta 1 dispositivos SATA Conector de panel frontal X1 Soporta instalaciones en el panel frontal Conector de sonido frontal X1 Soporta funciones de sonido en el panel frontal Conector de salida S/PDIF X1 Soporta función de salida de sonido digital Cabecera de ventilador de CPU X1
Motherboard Manual PORTUGUESE ESPECIFICAÇÕES Sockel AM2+ Processadores AMDSempron / Athlon / Athlon II CPU / Phenom / Phenom II A arquitectura AMD 64 permite uma computação de 32 e 64 bits Watt máximo: 95W (A780L M2G+/ Suporta as tecnologias Hyper Transport 3.0 A780L M2L+) Watt máximo: 125W (A780L) FSB Chipset Especificaç ão Super I/O Memória principal Placa gráfica Suporta a tecnologia HyperTransport 3.0 com uma largura de banda até 3.
A780L M2G+/A780L M2L+/A780L ESPECIFICAÇÕES Conectores na placa Conector da unidade de disquetes x1 Cada conector suporta 2 unidades de disquetes Conector IDE x1 Cada conector suporta 2 dispositivos IDE Conector SATA x4 Cada conector suporta 1 dispositivo SATA Conector do painel frontal x1 Para suporte de várias funções no painel frontal Conector de áudio frontal x1 Suporta a função de áudio no painel frontal Conector de saída S/PDIF x1 Suporta a saída de áudio digital Conector da ventoin
Motherboard Manual POLISH SPEC Sockel AM2+ AMD Sempron / Athlon / Athlon II / Phenom / Procesor Phenom II Procesory Maksymalny Watt: 95W (A780L M2G+/ A780L M2L+) Architektura AMD 64 umożliwia przetwarzanie 32 i 64 bitowe Obsługa Hyper Transport 3.0 Maksymalny Watt: 125W (A780L) FSB Chipset Obsługa HyperTransport 3.0 o szerokości pasma do 3.2 GT/s AMD RS780L AMD SB710 Gniazda DDR2 DIMM x 2 Moduł pamięci DDR2 z trybem podwójnego kanału Pamięć Maks.
A780L M2G+/A780L M2L+/A780L SPEC Złącze napędu dyskietek x1 Każde złącze obsługuje 2 napędy dyskietek Złącze IDE x1 Każde złącze obsługuje 2 urządzenia IDE Złącze SATA x4 Każde złącze obsługuje 1 urządzenie SATA Złącze panela przedniego x1 Obsługa elementów panela przedniego Przednie złącze audio x1 Obsługa funkcji audio na panelu przednim Złącze wyjścia S/PDIF x1 Obsługa funkcji cyfrowego wyjścia audio Złącze główkowe wentylatora procesora Złącza x1 wbudowan Złącze główkowe wentylatora
Motherboard Manual RUSSIAN СПЕЦ Гнездо AM2+ CPU (централь ный процессор ) Процессоры AMDSempron / Athlon / Athlon II/ Phenom/ Phenom II Максимальный ватт: 95W (A780L M2G+ /A780L M2L+) Архитектура AMD 64 разрешать обработка данных на 32 и 64 бит Поддержка Hyper Transport 3.0 Максимальный ватт: 125W (A780L) FSB Набор Поддержка HyperTransport 3.0 с пропускной способностью до 3.
A780L M2G+/A780L M2L+/A780L СПЕЦ Разъём НГМД x1 Разъём IDE x1 Каждый разъём поддерживает 2 встроенных интерфейса накопителей Разъём SATA x4 Каждый разъём поддерживает 1 устройство SATA Разъём на лицевой панели x1 Поддержка устройств на лицевой панели Входной звуковой разъём x1 Поддержка звуковых функций на лицевой панели Разъём вывода для S/PDIF x1 Поддержка вывода цифровой звуковой функции Контактирующее приспособление Источник питания для вентилятора центрального вентилятора центральног
Motherboard Manual ARABIC اﻟﻤﻮاﺻﻔﺎت AM2+ﻡﻘﺒﺲ AMD Sempron / Athlon / Athlon IIﻡﻌﺎﻟﺠﺎت وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ Phenom II / Phenom ) (A780L M2G+/A780L M2L+و: 95ﻗﺼ ﻮى واط إﺟﺮاء اﻟﻌﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺑﻴﺔ ﺑﺴﺮﻋﺔ 32و 64ﺑﺖAMD 64ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ و Hyper Transport3.0ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ ) ((A780Lو: 125ﻗﺼ ﻮى واط اﻟﻨﺎﻗﻞ اﻷﻣﺎﻣﻲ اﻟﺠﺎﻥﺒﻲ 3.2 GT/sﺑﺘﺮدد یﺼﻞ إﻟﻰHyperTransport 3.
A780L M2G+/A780L M2L+/A780L اﻟﻤﻮاﺻﻔﺎت ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ ﻋﺪد 1 یﺪﻋﻢ ﻡﺤﺮآﻴﻦ ﻟﻸﻗﺮاص اﻟﻤﺮﻥﺔ ﻡﻨﻔﺬ IDE ﻋﺪد 1 IDEیﺪﻋﻢ آﻞ ﻡﻨﻔﺬ اﺙﻨﻴﻦ ﻡﻦ أﺟﻬﺰة ﻡﻨﻔﺬ SATA ﻋﺪد4 SATAیﺪﻋﻢ آﻞ ﻡﻨﻔﺬ واﺡﺪ ﻡﻦ أﺟﻬﺰة ﻡﻨﻔﺬ اﻟﻠﻮﺡﺔ اﻷﻡﺎﻡﻴﺔ ﻋﺪد 1 یﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺡﺔ اﻷﻡﺎﻡﻴﺔ ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ ﻋﺪد 1 یﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺑﺎﻟﻠﻮﺡﺔ اﻷﻡﺎﻡﻴﺔ ﻡﻨﻔﺬ ﺥﺮج S/PDIF ﻋﺪد 1 ﻳﺪﻋﻢ وﻇﻴﻔﺔ ﺧﺮج اﻟﺼﻮت اﻟﺮﻗﻤﻲ اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ وﺹﻠﺔ ﻡﺮوﺡﺔ وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ ﻋﺪد 1 Smart Fanﻟﺘﻮﺹﻴﻞ
Motherboard Manual JAPANESE 仕様 Sockel AM2+ AMD Sempron / Athlon / Athlon II / Phenom / AMD 64アーキテクチャでは、32ビットと64ビット計算が可 CPU Phenom II プロセッサ 能です 最高のワット: 95W (A780L M2G+/ ハイパートランスポート3.0とクールアンドクワイアットを A780L M2L+) サポートします 最高のワット: 125W (A780L) FSB 3.2 GT/sのバンド幅までハイパートランスポ ート3.
A780L M2G+/A780L M2L+/A780L 仕様 フロッピーコネクタ x1 各コネクタは2つのフロッピードライブをサポートします IDEコネクタ x1 各コネクタは2つのIDEデバイスをサポートします SATAコネクタ x4 各コネクタは1つのSATAデバイスをサポートします フロントパネルコネクタ x1 フロントパネル機能をサポートします フロントオーディオコネクタ x1 フロントパネルオーディオ機能をサポートします S/PDIFアウトコネクタ x1 デジタルオーディオアウト機能をサポートします CPUファンヘッダ x1 CPUファン電源装置(スマートファン機能を搭載) システムファンヘッダ x1 システムファン電源装置 CMOSクリアヘッダ x1 USBコネクタ x2 オンボード コネクタ 各コネクタは2つのフロントパネルUSBポートをサポートし ます 背面パネル I/O ボードサイ 電源コネクタ(24ピン) x1 電源コネクタ(4ピン) x1 プリンタポートコネクタ x1 各コネクタは1つのプリンタポートをサポートし