GF7050V-M7 SE Setup Manual FCC Information and Copyright This equipment has been tes ted and found to comply with the limits of a Class B digital devic e, purs uant to Part 15 of the FCC Rules . T hese limits are designed to provide reasonable protec tion against harmful interference in a residential installation.
Table of Contents Chapter 1: Introduction.....................................................1 1.1 Before You Start................................................................... 1 1.2 Package Checklist................................................................ 1 1.3 Motherboard Features.......................................................... 2 1.4 Rear Panel Connectors.......................................................... 3 1.5 Motherboard Layout ............................................
GF7050V-M7 SE CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU ST ART Thank you for choosing our product. Be fore you start installing the mothe rboard, please make sure you follow the instructions be low: Prepare a dry and stable work ing environment with sufficie nt lighting. Always disconne ct the compute r from powe r outle t be fore ope ration.
Motherboard Manual 1.
GF7050V-M7 SE SPEC Back Panel I/O Front Panel Connector x1 Supports front panel facilities Front Audio Connector x1 Supports front panel audio function CD-in Connector x1 Supports CD audio-in function S/PDIF out connector x1 Supports digital audio out function CPU Fan header x1 CPU Fan power supply (with Smart Fan function) System Fan header x1 System Fan Power supply Clear CMOS header x1 Restore CMOS data to factory default USB connector x2 Each connector supports 2 front panel USB
Motherboard Manual 1.5 MOT HERBOARD LAYOUT JKB MS1 JCFAN1 JKB_PWR1 COM1 JCOM1 LGA775 JATXPWR3 JATXPWR2 CPU1 DIMMA2 DIMMA1 JVGA1 JUSB1 JUSB_PWR1 JUSBLAN1 JAUDIO1 IDE1 GeForce 7050/ nForce 610i LAN BIOS JCDIN1 PEX1_1 PEX16_1 SATA4 SATA3 BAT1 SATA2 PCI1 SATA1 Super I/O JSPDIF_OUT1 JCMOS1 PCI2 JAUDIOF1 Codec JPRNT1 JUSB_PWR2 FDD1 Not e: ■ repre sents the 1st pin.
GF7050V-M7 SE CHAPTER 2: HARDWARE INSTALLATION 2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU) Special Notice: Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be damaged. Pin-Cap Step 1: Pull the socket locking lever out from the socket and then raise the lever up to a 90-degree angle.
Motherboard Manual Step 2: Look for the triangular cut edge on socket, and the golden dot on CPU should point forwards this triangular cut edge. The CPU will fit only in the correct orientation. Step 2-1: Step 2-2: Step 3: Hold the CPU down firmly, and then lower the lever to locked position to complete the installation. Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it on the retention frame. Connect the CPU FAN power cable into the JCFAN1. This completes the installation.
GF7050V-M7 SE 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
Motherboard Manual 2.3 INST ALLING SYST EM MEMORY DIMMA1 DIMMA2 A. Memory Modules 1. 8 Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot.
GF7050V-M7 SE 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated. B. Memory Capacity DIMM Socket Location DIMMA1 256MB/512MB/1024MB/2048MB DIMMA2 256MB/512MB/1024MB/2048MB DDR2 Module Total Memory Size Max is 4GB.
Motherboard Manual 2.4 CONNECT ORS AND SLOT S FDD1: Floppy Disk Conne ctor The motherboard prov ides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the prov ided f loppy drive ribbon cables. 2 34 1 33 IDE1: Hard Disk Conne ctor The motherboard has a 32-bit Enhanced PCI IDE Controller that prov ides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 f unctionality.
GF7050V-M7 SE PEX16_1: PCI-Express x16 Slot - PCI-Express 1.0a compliant. - Maximum theoretical realized bandwidth of 2GB/s simultaneously per direction, f or an aggregate of 4GB/s totally. - x8 Speed by Chipset Specif ication. PEX1_1: PCI-Expre ss x1 Slot - PCI-Express 1.0a compliant. Data transf er bandwidth up to 250MB/s per direction; 500MB/s in total. PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins. - 2X bandwidth ov er the traditional PCI architecture.
Motherboard Manual CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW T O SET UP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DET AIL SETT INGS JPANEL1: Front Panel Heade r This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connections. It allows user to connect the PC case’s f ront panel switch f unctions.
GF7050V-M7 SE JATXPWR1: ATX Powe r Source Conne ctor This connector allows user to connect 24-pin power connector on the ATX power supply. 12 24 1 13 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Assignment +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage +5V +12V +12V +3.3V +3.3V -12V Ground PS_ON Ground Ground Ground -5V +5V +5V +5V Ground JATXPWR2: ATX Powe r Source Conne ctor By connecting this connector, it will provide +12V to CPU power circuit.
Motherboard Manual JUSB2/JUSB3: Heade rs for USB 2.0 Ports at Front Panel This motherboard prov ides 2 USB 2.0 headers, which allows user to connect additional USB cable on the PC front panel, and also can be connected with internal USB dev ices, like USB card reader.
GF7050V-M7 SE JSPDIF_O UT1: Digital Audio out Conne ctors This connector allows user to connect the PCI bracket SPDIF output header. Pin 1 2 3 3 Assignment +5V SPDIF_OUT 1 Ground 1 JAUDIO F1: Front Panel Audio Heade r This header allows user to connect the front audio output cable with the PC f ront panel. This header allows only HD audio front panel connector; AC’97 connector is not acceptable.
Motherboard Manual JCDIN1: CD-RO M Audio-in Connector This connector allows user to connect the audio source f rom the variaty dev ices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.. Pin 1 1 2 3 4 4 Assignment Left Channel Input Ground Ground Right Channel Input JCMO S1: Cle ar CMOS Heade r By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting and the CMOS data, please carefully f ollow the procedures to avoid damaging the motherboard.
GF7050V-M7 SE JUSB_PWR1/JUSB_PWR2: Powe r Source Heade rs for USB Ports Pin 1-2 Close: JUSB_PWR1: +5V for USB ports at JUSB1/JUSBLAN1. JUSB_PWR2: +5V for USB ports at f ront panel (JUSB2/JUSB3). Pin 2-3 Close: JUSB_PWR1: +5V STB for USB ports at JUSB1/JUSBLAN1. JUSB_PWR2: +5V STB for USB ports at f ront panel (JUSB2/JUSB3). JUSB_PWR1 3 3 1 Pin 1-2 close 1 JUSB_PWR2 3 1 3 1 Pin 2-3 close JKB_PWR1: Power Source Heade r for PS/2 Ke yboard and Mouse 3 1 3 1 Pin 1-2 close +5V for PS/2 keyboard and mouse.
Motherboard Manual JPRNT1: Printe r Port Connector This header allows you to connector printer on the PC.
GF7050V-M7 SE CHAPTER 4: RAID FUNCTIONS 4.1 O PERAT ION SYST EM z Supports Windows XP Home/Prof essional Edition and Windows Vista. 4.2 RAID ARRAYS RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1: RAID 1 defines techniques for mirroring data. RAID 0+1: RAID 0+1 combines the techniques used in RAID 0 and RAID 1. 4.
Motherboard Manual RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure.
GF7050V-M7 SE RAID 0+1: RAID 0 drives can be mirrored using RAID 1 techniques. Resulting in a RAID 0+1 solution for improved performance plus resiliency. Features and Benefits Drives: Minimum 4, and maximum is 6 or 8, depending on the platform. Benefits: Optimizes for both fault tolerance and perf ormance, allowing for automatic redundancy. May be simultaneously used with other RAID lev els in an array, and allows for spare disks.
Motherboard Manual CHAPTER 5: USEFUL HELP 5.1 DRIVER INST ALLAT ION NOT E After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you ins ert the Driver CD, please use file brows er to locate and execute the file SETUP.
GF7050V-M7 SE 5.2 SOFT WARE Installing Software 1. Insert the Setup CD to the optical drive. The drivers installation program would appear if the Autorun function has been enabled. 2. Select Software Installation, and then click on the respective software title. 3. Follow the on-screen instructions to complete the installation. Launching Software After the installation process, you will see the software icon “eHOT Line” / “BIOS Update” appears on the desktop. Double-click the icon to launch the utility.
Motherboard Manual After filling up this information, click “Send” to send the mail out. A warning dialog would appear asking for your confirmation; click “Send” to confirm or “Do Not Send” to cancel. If you want to save this information to a .txt file, click “Save As…” and then you will see a saving dialog appears asking you to enter file name. Enter the file name and then click “Sav e”. Your system information will be saved to a .txt file. Open the saved .
GF7050V-M7 SE BIOS Update BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system. AWARD BIO S Show current BI OS information AMI BIO S Clear CMOS function (Only for AWARD BIOS) Save current BIOS to a .bin file Update BIOS with a BIOS file Once click on this button, the saving dialog will show. Choose the position to save file and enter file name. (We recommend that the file name should be English/number and no longer than 7 characters.
Motherboard Manual Before doing this, please download the proper BIOS file from the website. For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first. Then click Update BIOS button, a dialog will show f or asking you backup current BIOS. Click Yes for BIOS backup and ref er to the Backup BIOS procedure; or click No to skip this procedure.
GF7050V-M7 SE 5.3 EXT RA INFORMAT ION CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3. CPU fan speed is fulfilling with the CPU speed.
Motherboard Manual BIO-Flasher BIO-Flasher is a BIOS flashing utility prov iding y ou an easy and simple way to update y our BIOS v ia USB pen drive or f loppy disk. The BIO-Flasher is built in the BIOS chip. To enter the utility, press during the Power-On Self Tests (POST) procedure while booting up. Updating BIOS with BIO-Flasher 1. Go to the website to download the latest BIOS file for the motherboard. 2. Then, sav e the BIOS f ile into a USB pen driv e or a f loppy disk. 3.
GF7050V-M7 SE 5.4 AMI BIO S BEEP CODE Boot Block Beep Codes Number of Beeps 1 2 3 4 5 7 10 11 12 13 Description No media present. (Insert diskette in f loppy drive A:) “AMIBOOT.ROM” f ile not f ound in root directory of diskette in A: Insert next diskette if multiple diskettes are used f or recovery Flash Programming successful File read error No Flash EPROM detected Flash Erase error Flash Program error “AMIBOOT.
Motherboard Manual 5.5 TROUBLESHOOT ING Probable Solution 1. Make sure power cable is No power to the system at all securely plugged in. Power light don’t illuminate, f an inside power supply does not turn 2. Replace cable. on. 3. Contact technical support. 2. Indicator light on key board does not turn on. System inoperativ e. Keyboard lights Using even pressure on both ends of are on, power indicator lights are lit, the DIMM, press down firmly until the and hard driv e is spinning.
GF7050V-M7 SE This page is intentionally left blank.
Motherboard Manual APPENDENCIES: SPEC IN OTHER LANGUAGE GERMAN Spezifikationen LGA 775 CPU Unterstützt Hyper-Threading / Execute Disable Bit Intel Core2Duo / Core2Quad / Celeron 4xx / / Enhanced Intel SpeedStep® / Intel Pentium 4 / Pentium D Prozessoren Architecture-64 / Extended Memory 64 Unterstützt 45nm CPU Technology / Virtualization Technology FSB 1333 MHz Chipsatz GeForce 7050/nForce 610i Grafik GeForce 7050/nForce 610i Max.
GF7050V-M7 SE Spezifikationen PCI-Steckplatz x2 Diskettenlaufwerkanschluss x1 Jeder Anschluss unterstützt 2 Diskettenlaufwerke IDE-Anschluss x1 Jeder Anschluss unterstützt 2 IDE-Laufwerke Druckeranschluss Anschluss x1 Jeder Anschluss unterstützt 1 Druckeranschluss SATA-Anschluss x4 Jeder Anschluss unterstützt 1 SATA-Laufwerk Fronttafelanschluss x1 Unterstützt die Fronttafelfunktionen Front-Audioanschluss x1 Unterstützt die Fronttafel-Audioanschlussfunktion CD-IN-Anschluss x1 Unterstütz
Motherboard Manual FRANCE SPEC Prend en charge les technologies LGA 775 UC Processeurs Intel Core2Duo / Core2Quad / Celeron 4xx / Pentium 4 / Pentium D Hyper-Threading / d'exécution de bit de désactivation / Intel SpeedStep® optimisée/ d'architecture Intel 64 / de mémoire étendue 64 Prend en charge le 45nm UC / de virtualisation Bus frontal 1333 MHz Chipset GeForce 7050/nForce 610i Mémoire vidéo partagée maximale de 512 Mo Graphiques GeForce 7050/nForce 610i Super E/S (under OS) ITE 8718F Initi
GF7050V-M7 SE SPEC Connecteur IDE x1 Connecteur de Port d'imprimante x1 Connecteur SATA x4 Connecteur du panneau avant x1 Connecteur Audio du panneau avant x1 Connecteur d'entrée CD x1 Connecteur de sortie S/PDIF x1 Embase de ventilateur UC x1 Embase de ventilateur système x1 Embase d'effacement CMOS x1 Connecteur USB x2 Connecteur d'alimentation (24 broches) x1 Connecteur d'alimentation (4 broches) x1 Clavier PS/2 x1 Souris PS/2 x1 E/S du Port série x1 panneau Port VGA x1
Motherboard Manual IT ALIAN SPECIFICA LGA 775 CPU Supporto di Hyper -Threadi ng / Execute Processore Intel Core 2Duo / Core 2Quad / Disable Bit / Enha nced I ntel Spee dStep® / Celeron 4xx / Pe ntium 4 / Pentium D Architettura Intel 64 / Tecnologi a Extende d Supporto 45nm CPU Memory 64 / Tec nologia Virtualization FSB 1333 MHz Chipset GeForce 7050/nForce 610i Grafica GeForce 7050/nForce 610i Super I/O La memoria video condivisa massima è di 512MB (under OS) ITE 8718F Funzioni di co ntrollo
GF7050V-M7 SE SPECIFICA Alloggio PCI x2 Connettore flo ppy x1 Ciascun connettore supporta 2 unità Floppy Connettore IDE x1 Ciascun connettore supporta 2 unità IDE Connettore Porta stampa nte x1 Connettore SATA x4 Ciascun connettore supporta 1 unità SATA Connettore pa nnello fro ntale x1 Supporta i servizi del pa nnell o fr ontale Connettore audio frontale x1 Supporta la funzione a udio pannello fr ontale Connettore CD-in x1 Supporta la funzione i nput audio C D Connettore output SPDIF
Motherboard Manual SPANISH Especificación CPU FSB Conjunto de chips Gráficos LGA 775 Admite Hyper-Threading / Bit de deshabilitación de Procesador Intel Core2Duo / Core2Quad / ejecución / Intel SpeedStep® Mejorado / Intel Celeron 4xx / Pentium 4 / Pentium D Architecture-64 / Tecnología Extended Memory 64 / Admite 45nm CPU Tecnología de virtualización 1333 MHz GeForce 7050/nForce 610i Memoria máxima de vídeo compartida de 512MB GeForce 7050/nForce 610i (under OS) Súper E/S ITE 8718F Iniciati
GF7050V-M7 SE Especificación Conectores en placa Ranura PCI X2 Conector disco flexible X1 Cada conector soporta 2 unidades de disco flexible Conector IDE X1 Cada conector soporta 2 dispositivos IDE Conector Puerto de impresora X1 Cada conector soporta 1 Puerto de impresora Conector SATA X4 Cada conector soporta 1 dispositivos SATA Conector de panel frontal X1 Soporta instalaciones en el panel frontal Conector de sonido frontal X1 Soporta funciones de sonido en el panel frontal Conector
Motherboard Manual PORT UGUESE ESPECIFICAÇÕES CPU LGA 775 Suporta as tecnologias Hyper-Threading / Processador Intel Core2Duo / Core2Quad / Execute Disable Bit / Enhanced Intel Celeron 4xx / Pentium 4 / Pentium D SpeedStep® / Intel Arquitecture -64 / Extended Suporta 45nm CPU Memory 64 / Virtualization FSB 1333 MHz Chipset GeForce 7050/nForce 610i Placa gráfica Memória de vídeo máxima partilhada: 512 MB GeForce 7050/nForce 610i (under OS) ITE 8718F Iniciativas para controlo do ambiente
GF7050V-M7 SE ESPECIFICAÇÕES Conector da unidade de disquetes x1 Cada conector suporta 2 unidades de disquetes Conector IDE x1 Cada conector suporta 2 dispositivos IDE Conector da para impressora x1 Cada conector suporta 1 Porta para impressora Conector SATA x4 Cada conector suporta 1 dispositivo SATA Conector do painel frontal x1 Para suporte de várias funções no painel frontal Conector de áudio frontal x1 Suporta a função de áudio no painel frontal Conector para entrada de CDs x1 Supor
Motherboard Manual POLISH SPEC Procesor LGA 775 Obsługa Hyper-Threading / Execute Disable Bit / Procesor Intel Core2Duo / Core2Quad / Enhanced Intel SpeedStep® / Intel Celeron 4xx / Pentium 4 / Pentium D Architecture-64 / Extended Memory 64 Obsługa 45nm Procesor Technology / Virtualization Technology FSB 1333 MHz Chipset GeForce 7050/nForce 610i Grafika GeForce 7050/nForce 610i Maks.
GF7050V-M7 SE SPEC Złącza Złącze napędu dyskietek x1 Każde złącze obsługuje 2 napędy dyskietek Złącze IDE x1 Każde złącze obsługuje 2 urządzenia IDE Złącze Port drukarki x1 Każde złącze obsługuje 1 Port drukarki Złącze SATA x4 Każde złącze obsługuje 1 urządzenie SATA Złącze panela przedniego x1 Obsługa elementów panela przedniego Przednie złącze audio x1 Obsługa funkcji audio na panelu przednim Złącze wejścia CD x1 Obsługa funkcji wejścia audio CD Złącze wyjścia S/PDIF x1 Obsługa fu
Motherboard Manual RUSSIAN СПЕЦ CPU Поддержка технологий Hyper-Threading / LGA 775 Execute Disable Bit / Enhanced Intel (центральн Процессор Intel Core2Duo / Core2Quad / ый SpeedStep® / Intel Architecture-64 / Extended Celeron 4xx / Pentium 4 / Pentium D Memory 64 Technology / технологии процессор) Поддержка технологий 45nm CPU FSB Набор микросхем Графика виртуализация 1333 МГц GeForce 7050/nForce 610i Максимальная совместно используемая видео GeForce 7050/nForce 610i память составляет 512 МБ (
GF7050V-M7 SE СПЕЦ Разъём Порт подключения принтера x1 Разъём SATA x4 Разъём на лицевой панели x1 Входной звуковой разъём x1 Разъём ввода для CD x1 Разъём вывода для S/PDIF x1 Каждый разъём поддерживает 1 устройство SATA Поддержка устройств на лицевой панели Поддержка звуковых функций на лицевой панели Поддержка функции ввода для CD Поддержка вывода цифровой звуковой функции Источник питания для вентилятора Контактирующее приспособление вентилятора центрального процессора x1 Контактирующее прис
Motherboard Manual ARABIC اﻟﻤﻮاﺻﻔﺎت Hyper-Threading / Execute Disable Bit /ﺕﺪﻋﻢ ﺕﻘﻨﻴﺎت LGA 775 وﺣﺪة اﻟﻤﻌ ﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ Intel Core2Duo / Core2Quad / Celeron 4xxﻡﻌ ﺎﻟﺠﺎت Enhanced Intel SpeedStep® / Intel ﺑ ﺘﺮدد ﻳﺼﻞ إﻟﻰ/ Pentium 4 / Pentium D Architecture-64 / Extended Memory 64 45nm CPUﺕﺪﻋﻢ ﺕﻘﻨﻴﺎت Technology / Virtualization Technology اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ اﻟﺠﺎﻥﺒﻲ ﻡﻴﺠﺎ هﺮﺕﺰ 1333ﺕﺮدد ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ GeForce 7050/nForce 610i ﺑﻄﺎﻗﺔ اﻟﺮﺳﻮﻡﺎت GeForce 705
GF7050V-M7 SE اﻟﻤﻮاﺻﻔﺎت ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ ﻋﺪد 1 ﻳﺪﻋﻢ ﻡﺤﺮآﻴﻦ ﻟﻸﻗﺮاص اﻟﻤﺮﻥﺔ ﻡﻨﻔﺬIDE ﻋﺪد 1 IDEﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ اﺙﻨﻴﻦ ﻡﻦ أﺝﻬﺰة ﻡﻨﻔﺬ ﻃﺎﺑﻌﺔ ﻋﺪد 1 ﻡﻨﻔﺬSATA ﻋﺪد 4 SATAﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ واﺣﺪ ﻡﻦ أﺝﻬﺰة ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻋﺪد 1 ﻳﺪﻋﻢ ﺕﺠﻬﻴﺰات اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ ﻋﺪد 1 ﻳﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺑﺎﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ ﻡﻨﻔﺬCD-IN ﻋﺪد 1 ﻳﺪﻋﻢ وﻇﻴﻔﺔ دﺥﻞ ﺹﻮت اﻟﻘﺮص اﻟﻤﺪﻡﺞ اﻟﻠﻮﺣﺔ ﻡﻨﻔﺬ ﺥﺮجS/PDIF ﻋﺪد 1 ﻳﺪﻋﻢ وﻇﻴﻔﺔ ﺥﺮج ا
Motherboard Manual JAPANESE 仕様 Hyper-Threading / Execute Disable Bit / LGA 775 CPU Intel Core2Duo / Core2Quad / Celeron 4xx / Pentium 4 / Pentium D processor Enhanced Intel SpeedStep® / Intel Architecture-64 / Extended Memory 64 Technology / Virtualization Technologyをサポート 45nm CPU をサポートします します FSB 1333 MHz チップセット GeForce 7050/nForce 610i グラフィック GeForce 7050/nForce 610i 最大の共有ビデオメモリは512MBです (under OS) ス DDR2 DIMMスロット x 2 各DIMMは256MB/512MB/1GB/2GB DDR2をサポ シングル チャンネルモードDDR2メモリモジュール メインメモリ ート 登録済みDIM
GF7050V-M7 SE 仕様 フロッピーコネクタ x1 各コネクタは2つのフロッピードライブをサポートし ます IDEコネクタ x1 各コネクタは2つのIDEデバイスをサポートします プリンタポートコネクタ x1 各コネクタは1つのプリンタポートをサポートします SATAコネクタ x4 各コネクタは1つのSATAデバイスをサポートします フロントパネルコネクタ x1 フロントパネル機能をサポートします フロントオーディオコネクタ x1 フロントパネルオーディオ機能をサポートします x1 CDオーディオイン機能をサポートします S/PDIFアウトコネクタ x1 デジタルオーディオアウト機能をサポートします CPUファンヘッダ x1 CPUファン電源装置(スマートファン機能を搭載) システムファンヘッダ x1 システムファン電源装置 CMOSクリアヘッダ x1 USBコネクタ x2 オンボードコ CDインコネクタ ネクタ 各コネクタは2つのフロントパネルUSBポートをサポ ートします 背面パネル I/O 電源コネクタ(24ピン) x1