Owner's Manual

K8VGA-M BIOS Setup
User’s Manual
12
3.1.1 Hard Disk Boot Priority
These BIOS attempt to load the operating system from the device in the
sequence selected in these items.
The Choices:
Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3, ZIP100,
LAN, HPT370, Dis abled , Enabled.
3.1.2 First/Second/Third/Boot Other Device
These BIOS attempt to load the operating system from the device in
the sequence selected in these items.
The Choices: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2,
HDD-3, ZIP100, LAN, HPT370, Disabled, Enabled.
3.3.2 Swap Floppy Drive
For systems with two floppy drives, this option allows you to swap
logical drive assignments.
The Choices: Disabled (default), Enabled.
3.3.3 Boot Up Floppy Seek
Enabling this option will test the floppy drives to determine if they have
40 or 80 tracks. Disabling this option reduces the time it takes to
boot-up.
The Choices: Disabled, Enabled (default).