Owner's Manual

K8VGA-M BIOS Setup
User’s Manual
17
4.1.1 AGP Aperture Size
Select the size of the Accelerated Graphics Port (AGP) aperture. The
aperture is a portion of the PCI memory address range dedicated for
graphics memory address space. Host cycles that hit the aperture
range are forwarded to the AGP without any translation.
The Choices: 64M, 256M, 128M (Default), 32M, 16M, 8M, 4M.
4.1.2 AGP 2.0 Mode
This item allows you to select the AGP Mode.
The Choices: 4X (default), 2X, 1X.
4.1.3 AGP Driving Control
By choosing “Auto” the system BIOS will the AGP output Buffer Drive
strength P Ctrl by AGP Card. By choosing “Manual”, it allows user to
set AGP output Buffer Drive strength P Ctrl by manual.
The Choices: Auto (default), Manual.
AGP Driving Value
While AGP driving control item set to “Manual”, it allows user to
set AGP driving.
The Choices: DA (default).
4.1.4 AGP Fast Write
The Choices: Enabled, Disabled (default).
4.1.5 AGP Master 1 WS Write
W hen Enabled, writes to the AGP (Accelerated Graphics Port) are
executed with one-wait states.
The Choices: Disabled (default), Enabled.
4.1.6 AGP Master 1 WS Read
When Enabled, read to the AGP (Accelerated Graphics Port) are
executed with one-wait states.
The Choices: Disabled (default), Enabled.
4.1.7 AGP 3.0 Calibration cycle
The Choices: Disabled (default), Enabled.