Owner's Manual

K8VGA-M BIOS Setup
User’s Manual
30
6.12.5 VGA
When set to On, any event occurring at a VGA Port will awaken a
system which has been powered down.
The Choices: Off (default), On.
6.12.6 LPT & COM
When this option is set to On, any event occurring at a COM
(serial)/LPT (printer) port will awaken a system which has been
powered down.
The Choices: LPT/COM (default), COM, LPT, NONE.
6.12.7 HDD & FDD
When this option is set to On, any event occurring on a hard drive or a
floppy drive will awaken a system which has been powered down.
The Choices: On (default), Off.
6.12.8 PCI Master
W hen set to On, you need a LAN add-o n c ard whic h supports the
po wer f unction. It should also s uppo rt the wake -up o n LAN jump.
The Choices: Off (default), On.
6.12.9 Power On by PCI Card
When you select Enabled, a PME signal from PCI card returns the
system to Full ON state.
The Choices: Disabled (default), Enabled.
6.12.10 Modem Ring Resume
The Choices: Disab led (Def ault), Enab led.
6.12.11 RTC Alarm Resume
When “Enabled”, you can set the date and time at which the RTC
(real-time clock) alarm awakens the system from Suspend mode.
The Choices: Enabled, Disabled (default).
6.12.12 Date (of Month)
You c an c hoose which month the s ystem will boot up. This field is only
configurable when “RTC Resume” is set to “Enabled”.