NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Contents Chapter 1: Introduction.......................................... 1 1.1 1.2 1.3 1.4 1.5 1.6 Before You Start ................................................................................1 Package Checklist ............................................................................1 Motherboard Specifications .............................................................2 Central Processing Unit (CPU) .......................................................3 Rear Panel Connectors........
NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U CHAPTER 1: INTRODUCTION 1.1 Before You Start Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: Prepare a dry and stable working environment with sufficient lighting. Always disconnect the computer from power outlet before operation.
Motherboard Manual 1.3 Motherboard Specifications Specifications NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz) CPU Support NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz) NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz) NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.
NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U 1.4 Central Processing Unit (CPU) The motherboard is equipped with an onboard Intel processor and a CPU cooler. Model: Onboard Intel CPU: NM70I-847 Intel® Celeron® Processor 847 (Dual Core 1.1GHz, Sandy Bridge) NM70I-807 Intel® Celeron® Processor 807 (Single Core 1.5GHz, Sandy Bridge) NM70I-1007U Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz, Ivy Bridge) NM70I-1037U Intel® Celeron® Processor 1037U (Dual Core 1.8 GHz, Ivy Bridge) 1.
Motherboard Manual 1.6 Motherboard Layout st Note: ■ represents the 1 pin.
NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U CHAPTER 2: HARDWARE INSTALLATION 2.1 Connect Cooling Fans These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
Motherboard Manual 2.2 Install System Memory A. DDR3 Modules Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. Step 2: Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated. Note: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again. B.
NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U C. Dual Channel Memory Installation Please refer to the following requirements to activate Dual Channel function: Install memory module of the same density in pairs, shown in the table. Dual Channel Status DDR3_A1 DDR3_B1 Disabled O X Disabled X O Enabled O O (O means memory installed, X means memory not installed.) Note: The DRAM bus width of the memory module must be the same (x8 or x16) 2.
Motherboard Manual 2.4 Jumper Setting The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened Pin closed Pin1-2 closed JCMOS1: Clear CMOS Header Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard. 1 3 Pin 1-2 Close: Normal Operation (default).
NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U 2.5 Headers & Connectors ATXPWR1: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. Pin Assignment Pin Assignment 13 14 15 16 17 18 19 20 21 22 23 24 +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground 1 2 3 4 5 6 7 8 9 10 11 12 +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.
Motherboard Manual PANEL1: Front Panel Header This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.
NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel This header allows user to connect additional USB cable on the PC front panel, and also can be connected with a wide range of simultaneously accessible external Plug and Play peripherals. Pin 1 2 3 4 5 6 7 8 9 10 Assignment +5V (fused) +5V (fused) USBUSBUSB+ USB+ Ground Ground NC Key F_AUDIO1: Front Panel Audio Header This header allows user to connect the front audio output cable with the PC front panel.
Motherboard Manual JSPDIFOUT1: Digital Audio-out Connector The JSPDIFOUT1 is for connecting the PCI bracket SPDIF output. Pin Assignment 1 2 3 +5V SPDIF_OUT Ground J_COM1: Serial Port Connector The motherboard has a Serial Port Connector for connecting RS-232 Port.
NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U J_PRINT1: Printer Port Connector This header allows you to connector printer on the PC.
Motherboard Manual CHAPTER 3: UEFI BIOS & SOFTWARE 3.1 z z 3.2 z z UEFI BIOS Setup For better system performance, the UEFI BIOS firmware is being continuously updated. The UEFI BIOS information described below in this manual is for your reference only and the actual UEFI BIOS information and settings on board may be different from this manual For further information of setting up the UEFI BIOS, please refer to the UEFI BIOS Manual in the Setup DVD.
NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U 6. Select the proper BIOS file, and a message asking if you are sure to flash the BIOS file. Click Yes to start updating BIOS. 7. A dialog pops out after BIOS flash is completed, asking you to restart the system. Press the [Y] key to restart system. 8. While the system boots up and the full screen logo shows up, press key to enter BIOS setup.
Motherboard Manual 4. An open dialog will show up to request your agreement to start the BIOS update. Click Yes to start the online update procedure. 5. If there is a new BIOS version, the utility will ask you to download it. Click Yes to proceed. 6. After the download is completed, you will be asked to program (update) the BIOS or not. Click Yes to proceed. 7. After the updating process is finished, you will be asked you to reboot the system. Click OK to reboot. 8.
NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U 4. A warning message will show up to request your agreement to start the BIOS update. Click OK to start the update procedure. 5. Choose the location for your BIOS file in the system. Please select the proper BIOS file, and then click on Open. It will take several minutes, please be patient. 6. After the BIOS Update process is finished, click on OK to reboot the system. 7.
Motherboard Manual 3.3 Software Installing Software 1. Insert the Setup DVD to the optical drive. The driver installation program would appear if the Autorun function has been enabled. 2. Select Software Installation, and then click on the respective software title. 3. Follow the on-screen instructions to complete the installation. Note1: All the information and content about following software are subject to be changed without notice.
NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U After filling up this information, click “Send” to send the mail out. A warning dialog would appear asking for your confirmation; click “Send” to confirm or “Do Not Send” to cancel. If you want to save this information to a .txt file, click “Save As…” and then you will see a saving dialog appears asking you to enter file name. Enter the file name and then click “Save”. Your system information will be saved to a .txt file. Open the saved .
Motherboard Manual BIOScreen Utility This utility allows you to personalize your boot logo easily. You can choose BMP as your boot logo so as to customize your computer. Please follow the step-by-step instructions below to update boot logo: z Load Image:Choose the picture as the boot logo. z Transform:Transform the picture for BIOS and preview the result. z Update Bios:Write the picture to BIOS Memory to complete the update.
NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U Rapid Start Technology Intel® Rapid Start technology enables your system to get up and running faster from even the deepest sleep, saving time and power consumption. Feel secure knowing that your system will still resume to working conditions in the event of unexpected power loss while in sleep mode. System Requirement: z z An Intel® SATA SSD (SATA Gen2 or Gen3.
Motherboard Manual 3-3 After rebooting, the system will setup Intel® Rapid Start Technology automatically. We recommend you restart the system after this installation is complete, Step 4: Configuring Intel® Rapid Start Application Launch the Intel® Rapid Start Technology Manager application from [Start] > [All Programs] > [Intel] or click the icon in the notification area.
NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U CHAPTER 4: USEFUL HELP 4.1 Driver Installation After you installed your operating system, please insert the Fully Setup Driver DVD into your optical drive and install the driver for better system performance. You will see the following window after you insert the DVD The setup guide will auto detect your motherboard and operating system.
Motherboard Manual 4.2 Extra Information CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3.
NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U 4.3 AMI BIOS Beep Code Boot Block Beep Codes Number of Beeps Continuing Description Memory sizing error or Memory module not found POST BIOS Beep Codes Number of Beeps 1 8 4.4 Description Success booting. Display memory error (system video adapter) Troubleshooting Probable 1. There is no power in the system. Power LED does not shine; the fan of the power supply does not work 2. Indicator light on keyboard does not shine. System is inoperative.
Motherboard Manual APPENDIX: SPEC IN OTHER LANGUAGES Arabic اﻟﻤﻮاﺻﻔﺎت )NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz ﻗﺎﻋﺪة وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ )NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz اﻟﻤﺮآﺰﻳﺔ )NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz )NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.8 GHz ﻣﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ Intel NM70 ﺗﺪﻋﻢ ﻗﻨﺎة ﻣﺰدوﺟﺔ دي .دي .ار(NM70I-847 & NM70I-807) DDR3 1066/1333 .
NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U French Spécifications NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz) Support Unité NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz) Centrale NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz) Jeu de puces INTEL NM70 NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.
Motherboard Manual German Spezifikationen NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz) CPU-Unterstützung NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz) NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz) NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.
NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U Italian Specificazioni NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz) Supporto NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz) processore NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz) Tipo scheda INTEL NM70 NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.
Motherboard Manual Japanese 仕様 NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz) CPU サポート NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz) NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz) NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.
NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U Polish Specyfikacje techniczne NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz) Obsługa procesora NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz) NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz) NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.
Motherboard Manual Portuguese Especificações NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz) Suporte Processador NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz) NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz) NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.
NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U Russian Спецификации Поддержка центрального процессора Набор микросхем NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz) NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz) NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz) NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.
Motherboard Manual Spanish Especificaciones NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz) Compatibilidad con NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz) NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz) el procesador NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.