User`s manual

11
Note: In order to support this function “Power-on system via USB device”,
“JUSBV1/JUSBV2/ JUSBV3_4” jumper cap should be placed on pin 2-3
individually.
Clear CMOS Jumper: JCMOS1
JCMOS1 Assignment
1
3
Pin 1-2 C lose
Normal Operation (default)
1
3
Pin 2-3 C lose
Clear CMOS Data
※ Clear CMOS Procedures:
1. Remov e AC power line.
2. Set the jumper to “Pin 2-3 Close”.
3. Wait for fiv e seconds.
4. Set the jumper to “Pin 1-2 Close”.
5. Power on the AC.
6. Reset y our desired password or clear the CMOS data.
Case Open Connector: JCL1
Pi n
Assignment
1
Case Open Signal
1
JCL1
2
Ground
AUDIO DJ Connector: JDJ1 (only optional on version 1.x)
Pin Assignment Pin Assignment
1
SMBDATA
2
SMBCLK
3
INT_B
4
KEY
15
JDJ1
5
ATX_PWROK