User`s manual

4
English
P4TSP-D2 Features
A. Har dware
CPU
Prov ides Socket 478.
Supports the Intel
®
Pentium
®
4 proc essor t o 3. 2GH z.
Supports the Intel
®
Pentium
®
4 Northwood CPU. (Willamette not supported)
Supports the Intel
®
Pentium
®
4 478-pin Prescott CPU.
Front Side Bus at 400/533/800MHz.
Supports Hy per-Threading Technology.
Chipset
North Bridge: Intel 848P.
South Bridge: Intel ICH5.
Main Memory
Supports 64-bit wide DDR data channels with 2 DIMMs.
Available bandwidth up to 3.2GB/s (DDR400) f or single-channel mode.
Supports 128-Mb, 256-Mb, 512-Mb DDR technologies.
Supports only x8, x16, DDR devices.
Supports four bank devices.
Maximum memory size is 2GB.
Super I/O
Chip: ITE IT8712.
Low Pin Count Interface.
Prov ides the most commonly used legacy Super I/O functionality.
Env ironm ent C ont rol init iat iv es,
- H/W Monitor
- Fan Speed Controller
- ITE's "Smart Guardian" f unction
Slots
Five 32-bit PCI bus master slots.
One CNR slot. (only optional on v ersion 1.x)
One AGP 4X/8X compatible slot.
On Board IDE
Supports four IDE disk drives.
Supports PIO Mode 4, Ultra DMA 33/66/100 Bus Master Mode.
LAN (optional)
Chip: RTL8100C/RTL8110S(B)
Supports 10Mb/s, 100Mb/s, and 1000Mb/s auto-negotiation operation.