TA890FXE Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Chapter 1: Introduction ........................................ 1 1.1 1.2 1.3 1.4 1.5 Before You Start ................................................................................ 1 Package Checklist ............................................................................. 1 Motherboard Features...................................................................... 2 Rear Panel Connectors ..................................................................... 3 Motherboard Layout...
TA890FXE CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU START Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: 1.2 Prepare a dry and stable working environment with sufficient lighting. Always disconnect the computer from power outlet before operation.
Motherboard Manual 1.3 MOTHERBOARD FEATURES SPEC CPU FSB Chipset Super I/O Socket AM3 AMD 64 Architecture enables 32 and 64 bit AMD Sempron / Phenom II / Athlon II computing processors Supports Hyper Transport 3.0 Support HyperTransport 3.0 Supports up to 5.2 GT/s Bandwidth AMD 890FX AMD SB850 ITE 8721 Environment Control initiatives, Provides the most commonly used legacy H/W Monitor Super I/O functionality.
TA890FXE SPEC CPU Fan Header x1 CPU Fan power supply (with Smart Fan function) System Fan Header x2 System Fan Power supply CMOS clear Header x1 Restore CMOS data to factory default USB Connector x3 Each connector supports 2 front panel USB ports IEEE 1394 Connector x1 Connects to IEEE 1394 device Serial Port Connector x1 Connects to RS-232 Port Power Connector (24-Pin) x1 Connects to Power supply Power Connector (8-Pin) x1 Connects to Power supply PS/2 Keyboard x1 Connects to PS/2
Motherboard Manual MOTHERBOARD LAYOUT NB_PH1 _D1 NB_PH1 _D2 PH1_ D1 PH2_ D2 PH3_ D3 PH4_ D4 1.5 KBMS1 C PU_FAN 1 SPDIF1 DDR 3_B2 DDR 3_A2 USB_1394_ ESATA1 DDR 3_B1 So cke t A M 3 USB1 DDR 3_A1 ATXPWR2 ATXPWR1 R J45U SB1 JUSBV1 AUD IO1 AMD 890FX JCMOS1 AU XPWR1 SYS_FAN 2 BAT1 PEX16_1 LAN AMD SB850 PEX16_2 BIOS SATA2 PEX16_3 C odec SATA1 PEX16_4 SATA3 PCI1 Super I/O PCI2 F_AUDIO1 CIR1 F_1394A1 ID E1 SYS_FAN1 SW_ PWR1 F_USB1 JSPD IFOU T1 Note: ■ represents the 1st pin.
TA890FXE CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Step 1: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle. Step 2: Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle. The CPU will fit only in the correct orientation.
Motherboard Manual Step 3: Hold the CPU down firmly, and then close the lever toward direct B to complete the installation. Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the CPU_FAN1. This completes the installation.
TA890FXE 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
Motherboard Manual 2.3 INSTALLING SYSTEM MEMORY 8 DDR 3_B2 DDR 3_A2 DDR 3_B1 DDR 3_A1 A. DDR3 Modules 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.
TA890FXE B. Memory Capacity DIMM Socket Location DDR3 Module DDR3_A1 512MB/1GB/2GB/4GB DDR3_B1 512MB/1GB/2GB/4GB DDR3_A2 512MB/1GB/2GB/4GB DDR3_B2 512MB/1GB/2GB/4GB Total Memory Size Max is 16GB. C. Dual Channel Memory installation Please refer to the following requirements to activate Dual Channel function: Install memory module of the same density in pairs, shown in the table.
Motherboard Manual 2.4 CONNECTORS AND SLOTS IDE1: IDE/ATAPI Connector The motherboard has a 32-bit Enhanced IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality. 39 1 40 2 SATA1~SATA3: Serial ATA Connectors The motherboard has a PCI to SATA Controller with 5 channels SATA interface, it satisfies the SATA 3.0 spec and with transfer rate of 6.0Gb/s.
TA890FXE ATXPWR1: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. Pin 13 14 15 16 17 18 19 20 21 22 23 24 12 24 1 13 Assignment +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground Pin 1 2 3 4 5 6 7 8 9 10 11 12 Assignment +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.3V ATXPWR2: ATX Power Source Connector This connector provides +12V to CPU power circuit.
Motherboard Manual AUXPWR1: Auxiliary Power for Graphics This connector is an auxiliary power connection for graphics cards. Exclusive power for the graphics card provides better graphics performance. Pin 4 1 1 2 3 4 Assignment +12V Ground Ground VCC PCI1/PCI2: Peripheral Component Interconnect Slots This motherboard is equipped with 2 standard PCI slots. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits.
TA890FXE PEX16_1/PEX16_3: PCI-Express Gen2 x16 Slots - PCI-Express 2.0 compliant. Maximum theoretical realized bandwidth of 8GB/s simultaneously per direction, for an aggregate of 16GB/s totally. PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins. PEX16_1 & PEX16_3 slots are reserved for graphic or video cards. PEX16_4: PCI-Express Gen2 x4 Slot - PCI-Express 2.0 compliant. Maximum theoretical realized bandwidth of 2GB/s simultaneously per direction, for an aggregate of 4GB/s totally.
Motherboard Manual CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DETAIL SETTINGS PANEL1: Front Panel Header This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.
TA890FXE JCMOS1: Clear CMOS Header Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard. 1 3 Pin 1-2 Close: Normal Operation (default). 1 3 1 3 Pin 2-3 Close: Clear CMOS data. ※ Clear CMOS Procedures: 1. 2. 3. 4. 5. 6. Remove AC power line. Set the jumper to “Pin 2-3 close”. Wait for five seconds. Set the jumper to “Pin 1-2 close”. Power on the AC.
Motherboard Manual F_AUDIO1: Front Panel Audio Header This header allows user to connect the front audio output cable with the PC front panel. This header allows only HD audio front panel connector; AC’97 connector is not acceptable. 2 10 1 9 Pin 1 2 3 4 5 6 7 8 9 10 Assignment Mic Left in Ground Mic Right in GPIO Right line in Jack Sense Front Sense Key Left line in Jack Sense JSPDIFOUT1: Digital Audio-out Connector This connector allows user to connect the PCI bracket SPDIF output header.
TA890FXE F_1394A1: IEEE 1394 Header This header allows user to connect IEEE 1394 device. 2 10 1 9 Pin 1 2 3 4 5 6 7 8 9 10 Assignment TPA1+ TPA1GND GND TPB1+ TPB1VCC VCC N/A KEY BIOS POST Code/CPU Temperature Indicator This indicator will show POST code while booting. After the booting sequence, it will show current CPU temperature through hexadecimal figure. Please refer to Chapter 7.4 for all the BIOS POST codes, and Chapter 7.5 for conversion of hexadecimal and decimal system.
Motherboard Manual F_USB1~F_USB3: Headers for USB 2.0 Ports at Front Panel These headers allow user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader. F_ USB1 F_USB3 F_ US B2 1 2 9 10 Pin 1 2 3 4 5 6 7 8 9 10 Assignment +5V (fused) +5V (fused) USBUSBUSB+ USB+ Ground Ground Key NC JUSBV1/JUSBV2: Power Source Headers for USB Ports Pin 1-2 Close: JUSBV1: +5V for USB ports at USB1/USB_1394_ESATA1/RJ45USB1.
TA890FXE On-Board LED Indicators NB_PH1_ D1 NB_PH1_ D2 PH1_ D1 PH2_ D2 PH3_ D3 PH4_ D4 There are 6 LED indicators showing system status. NB_PH1_D1/NB_PH1_D2: NB Power Status Indicators PH1_D1/PH2_D2/PH3_D3/PH4_D4: CPU Power Status Indicators Please refer to the tables below for specific messages: LED ON OFF Phase Indicator Phase Active Phase Disable On-Board Buttons There are 2 on-board buttons. SW_RST1 SW_PWR1 SW_RST1: Reset button. SW_PWR1: Power Switch button.
Motherboard Manual CHAPTER 4: CROSSFIREX FUNCTION 4.1 CROSSFIREX INTRODUCTION CrossFireX (also known as ATI CrossFire) is a brand name for ATI Technologies' multi-GPU solution. The technology enables two or more discrete graphics processors to work together in a single computer to improve graphics performance. 4.2 CROSSFIREX CONFIGURATION Insert the Hybrid CrossFireX-Ready graphics card into PEX16_1, PEX16_3, or PEX16_4. Please refer to the following table to activate CFX function.
TA890FXE CHAPTER 5: RAID FUNCTIONS 5.1 OPERATING SYSTEM Supports Windows Vista and Windows 7. 5.2 RAID ARRAYS RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1: RAID 1 defines techniques for mirroring data. RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1. RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity. 5.
Motherboard Manual RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure.
TA890FXE RAID 10: RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 10 solution for improved resiliency, performance and rebuild performance. Features and Benefits Drives: Minimum 4, and maximum is 6 or 8, depending on the platform. Benefits: Optimizes for both fault tolerance and performance, allowing for automatic redundancy. May be simultaneously used with other RAID levels in an array, and allows for spare disks.
Motherboard Manual RAID 5: RAID 5 stripes both data and parity information across three or more drives. It writes data and parity blocks across all the drives in the array. Fault tolerance is maintained by ensuring that the parity information for any given block of data is placed on a different drive from those used to store the data itself. Features and Benefits Drives: Minimum 3. Uses: RAID 5 is recommended for transaction processing and general purpose service.
TA890FXE CHAPTER 6: T-SERIES BIOS & SOFTWARE 6.1 T-SERIES BIOS T-Series BIOS Features Overclocking Navigator Engine (O.N.E.) Memory Integration Test (M.I.T., under Overclock Navigator Engine) BIO-Flasher: Update BIOS file from USB Flash Drive or FDD Self Recovery System (S.R.S) Smart Fan Function CMOS Reloading Program !! WARNING !! For better system performance, the BIOS firmware is being continuously updated.
Motherboard Manual Manual Overclock System (M.O.S.) MOS is designed for experienced overclock users. It allows users to customize personal overclock settings. Main Advanced PCIPnP BIOS SETUP UTILITY Boot Chipset T-Series T-Series Settings Exit Options Notice: Please Clear CMOS if system no display after overclocking.
TA890FXE Hyper Transport Configuration Enter this function for more advanced Hyper Transport settings. DRAM Timing Configuration Enter this function for more advanced DRAM clock settings. G.P.U Phase Control Enter this function for more power saving settings. NOTE Overclock is an optional process, but not a “must-do” process; it is not recommended for inexperienced users. Therefore, we will not be responsible for any hardware damage which may be caused by overclocking.
Motherboard Manual V6 Tech Engine This engine will make a good over-clock performance. Main Advanced PCIPnP BIOS SETUP UTILITY Boot Chipset T-Series T-Series Settings Exit Options Notice: Please Clear CMOS if system no display after overclocking.
TA890FXE Notices: Not all types of AMD CPU perform above overclock setting ideally; the difference will be based on the selected CPU model. B. Memory Integration Test (M.I.T.) This function is under “Overclocking Navigator Engine” item. MIT allows users to test memory compatibilities, and no extra devices or software are needed. Step 1 The default setting under this item is “Disabled”; the condition parameter should be changed to “Enable” to proceed this test.
Motherboard Manual C. BIO-Flasher BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive or floppy disk. The BIO-Flasher is built in the BIOS chip. To enter the utility, press during the Power-On Self Tests (POST) procedure while booting up. Updating BIOS with BIO-Flasher 1. Go to the website to download the latest BIOS file for the motherboard. 2. Then, save the BIOS file into a USB pen drive or a floppy disk. 3.
TA890FXE D. Self Recovery System (S.R.S.) This function can’t be seen under BIOS setup; and is always on whenever the system starts up. However, it can prevent system hang-up due to inappropriate overclock actions. When the system hangs up, S.R.S. will automatically log in the default BIOS setting, and all overclock settings will be re-configured. E. Smart Fan Function Smart Fan Function is under “Smart Fan Configuration” in “Advanced Menu”.
Motherboard Manual Smart Fan Calibration Choose this item and then the BIOS will automatically test and detect the CPU/System fan functions and show CPU/System fan speed. Control Mode This item provides several operation modes of the fan. Fan Ctrl OFF(℃) If the CPU/System temperature is lower than the set value, the CPU/ System fan will turn off. The range is from 0~127, with an interval of 1. Fan Ctrl On(℃) The CPU/System fan starts to work when CPU/System temperature arrives to this set value.
TA890FXE 6.2 T-SERIES SOFTWARE Installing T-Series Software 1. Insert the Setup CD to the optical drive. The drivers installation program would appear if the Auto-run function has been enabled. 2. Select Software Installation, and then click on the respective software title. 3. Follow the on-screen instructions to complete the installation. Launching T-Series Software After the installation process is completed, you will see the software icon showing on the desktop. Double-click the icon to launch it.
Motherboard Manual The CPU tab provides information on the CPU and motherboard. The Memory tab provides information on the memory module(s). You can select memory module on a specific slot to see its information. The OC Tweaker tab allows you to change system clock settings and voltages settings.
TA890FXE Six Pre-set Modes: V3, V6, V9, V12, V15, AUTO for different overclocking experience. The HW Monitor tab allows you to monitor hardware voltage, fan speed, and temperature. Besides, you also can set related values for CPU Smart Fan.
Motherboard Manual Pressing TOVERCLOCKER logo will display information about manufacturer and software version. You can update currnet version by clicking the button “Live Update.” Green Power II Utility BIOSTAR G.P.U II (Green Power Utility) is a new function. The utility enhances energy efficiency by disabling extra phases while CPU is on light loading; it features 4+1 power phases, current power saving, and toal power saving.
TA890FXE G.P.U Mode Setting This utility provides five modes, upon your requirements, to improve system performance or to save power consumption. Note: Even if the modes saving more power consumption are chosen, the system still can keep excellent performance. Auto Phase Mode System switches the mode automatically according to current system loading condition. Performance Mode This is the mode saving power consumption most. Least energy will be used in the system.
Motherboard Manual eHot-Line (Optional) eHot-Line is a convenient utility that helps you to contact with our Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem. Before you use this utility, please set Outlook Express as your default e-mail client application program. represent s import ant *information that you must provide.
TA890FXE Enter the file name and then click “Save”. Your system information will be saved to a .txt file. Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail. We will not share customer’s data with any other third parties, so please feel free to provide your system information while using eHot-Line service.
Motherboard Manual BIOS Update BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system. AWARD BIOS Show current BIOS information Online Update function Clear CMOS function (Only for AMI BIOS) (Only for AWARD BIOS) Save current BIOS to a .bin file Update BIOS with a BIOS file Once click on this button, the saving dialog will show. Choose the position to save file and enter file name.
TA890FXE Before doing this, please download the proper BIOS file from the website. For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first. Then click Update BIOS button, a dialog will show for asking you backup current BIOS. Click Yes for BIOS backup and refer to the Backup BIOS procedure; or click No to skip this procedure.
Motherboard Manual (for AMI BIOS only) Automatically download and update the latest BIOS via internet; make sure that the computer is connected to the internet before using this function. After clicking on the Onlinr Update button, the utility will search for the latest BIOS from internet. If there is a new BIOS version, the utility will ask you to download it. Click Yes to proceed.
TA890FXE CHAPTER 7: USEFUL HELP 7.1 DRIVER INSTALLATION NOTE After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.
Motherboard Manual 7.2 EXTRA INFORMATION CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3.
TA890FXE 7.3 AMI BIOS BEEP CODE Boot Block Beep Codes Number of Beeps 1 2 3 4 5 7 10 11 12 13 Description No media present. (Insert diskette in floppy drive A:) “AMIBOOT.ROM” file not found in root directory of diskette in A: Insert next diskette if multiple diskettes are used for recovery Flash Programming successful File read error No Flash EPROM detected Flash Erase error Flash Program error “AMIBOOT.
Motherboard Manual 7.4 AMI BIOS POST CODE Checkpoint 03 04 05 06 07 08 C0 C1 C2 C5 C6 C7 0A 0B 0C 0E 13 20 24 2A 2C 2E 31 33 46 Description Disable NMI, Parity, video for EGA, and DMA controllers. Initialize BIOS, POST, Runtime data area. Also initialize BIOS modules on POST entry and GPNV area. Initialized CMOS as mentioned in the Kernel Variable "wCMOSFlags." Check CMOS diagnostic byte to determine if battery power is OK and CMOS checksum is OK.
TA890FXE Checkpoint 37 38 39 3A 3B 3C 40 52 60 75 78 7C 84 85 87 8C 8D 8E 90 A1 A2 A4 A7 A9 AA AB AC B1 00 Description Displaying sign-on message, CPU information, setup key message, and any OEM specific information. Initializes different devices through DIM. See DIM Code Checkpoints section of document for more information. USB controllers are initialized at this point. Initializes DMAC-1 & DMAC-2. Initialize RTC date/time. Test for total memory installed in the system.
Motherboard Manual 7.
TA890FXE 7.6 TROUBLESHOOTING Probable 1. There is no power in the system. Power LED does not shine; the fan of the power supply does not work 2. Indicator light on keyboard does not shine. System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running. System does not boot from a hard disk drive, but can be booted from optical drive. Solution 1. 2. 3. Make sure power cable is securely plugged in. Replace cable. Contact technical support.
Motherboard Manual APPENDIX: SPEC IN OTHER LANGUAGES GERMAN Spezifikationen CPU FSB Sockel AM3 Die AMD 64-Architektur unterstützt eine 32-Bit- und AMD Sempron / Phenom II / Athlon II 64-Bit-Datenverarbeitung Prozessoren Unterstützt Hyper Transport 3.0 Unterstützt HyperTransport 3.0 mit einer Bandbreite von bis zu 5.2 GT/s Chipsatz AMD 890FX AMD SB850 ITE 8721 Super E/A Umgebungskontrolle, Bietet die häufig verwendeten alten Super Hardware-Überwachung E/A-Funktionen.
TA890FXE Spezifikationen IDE-Anschluss x1 Jeder Anschluss unterstützt 2 IDE-Laufwerke SATA-Anschluss x5 Jeder Anschluss unterstützt 1 SATA-Laufwerk Fronttafelanschluss x1 Unterstützt die Fronttafelfunktionen Front-Audioanschluss x1 Unterstützt die Fronttafel-Audioanschlussfunktion S/PDIF Ausgangsanschluss x1 Unterstützt die digitale Audioausgabefunktion Verbraucher-IR Anschluss x1 CPU-Lüfter-Sockel x1 CPU-Lüfterstromversorgungsanschluss (mit Smart Fan-Funktion) Onboard-Ans chluss System
Motherboard Manual FRENCH SPEC Socket AM3 UC L'architecture AMD 64 permet le calcul 32 et 64 bits Processeurs AMD Sempron / Phenom II / Prend en charge Hyper Transport 3.0 Athlon II Bus frontal Prend en charge Hyper Transport 3.0 jusqu'à une bande passante de 5.2 GT/s Chipset AMD 890FX AMD SB850 Super E/S ITE 8721 Initiatives de contrôle environnementales, Fournit la fonctionnalité de Super E/S Moniteur de matériel patrimoniales la plus utilisée.
TA890FXE SPEC Chaque connecteur prend en charge 2 périphériques Connecteur IDE x1 Connecteur SATA x5 Connecteur du panneau avant x1 Prend en charge les équipements du panneau avant Connecteur Audio du panneau avant x1 Prend en charge la fonction audio du panneau avant Connecteur de sortie S/PDIF Prend en charge la fonction de sortie audio numérique x1 IDE Chaque connecteur prend en charge 1 périphérique SATA Connecteur de IR du consommateur x1 Embase de ventilateur UC x1 Embase de ventilateu
Motherboard Manual ITALIAN SPECIFICA L’architettura AMD 64 abilita la co mputazione 32 Socket AM3 CPU Processori AMD Sempron / Phenom II / e 64 bit Supporto di Hyper Transport 3.0 Athlon II FSB Supporto di HyperTransport 3.0 fino a 5.2 GT/s di larghezza di banda Chipset AMD 890FX AMD SB850 Funzioni di controllo dell’ambiente: ITE 8721 Super I/O Fornisce le funzionalità legacy Super Monitoraggio hardware I/O usate più comunemente.
TA890FXE SPECIFICA Connettore IDE x1 Ciascun connettore supporta 2 unità IDE Connettore SATA x5 Ciascun connettore supporta 1 unità SATA Connettore pannello frontale x1 Supporta i servizi del pannello frontale Connettore audio frontale x1 Supporta la funzione audio pannello frontale Connettore output S/PDIF x1 Supporta la funzione d’output audio digitale Connettore IR del consumatore x1 Collettore ventolina CPU x1 Alimentazione ventolina CPU (con funzione Smart Fan) Connettori Collettore v
Motherboard Manual SPANISH Especificación La arquitectura AMD 64 permite el procesado de 32 y Conector AM3 CPU Procesadores AMD Sempron / Phenom II / 64 bits Soporta las tecnologías Hyper Transport 3.0 Athlon II FSB Admite HyperTransport 3.0 con un ancho de banda de hasta 5.2 GT/s Conjunto de AMD 890FX chips AMD SB850 Iniciativas de control de entorno, ITE 8721 Súper E/S Le ofrece las funcionalidades heredadas de Monitor hardware uso más común Súper E/S.
TA890FXE Especificación Conector IDE X1 Cada conector soporta 2 dispositivos IDE Conector SATA X5 Cada conector soporta 1 dispositivos SATA Conector de panel frontal X1 Soporta instalaciones en el panel frontal Conector de sonido frontal X1 Soporta funciones de sonido en el panel frontal Conector de salida S/PDIF X1 Soporta función de salida de sonido digital Conector de IR del consumidor X1 Cabecera de ventilador de CPU X1 Fuente de alimentación de ventilador de CPU (con función Smart Fa
Motherboard Manual PORTUGUESE ESPECIFICAÇÕES Socket AM3 CPU A arquitectura AMD 64 permite uma computação de 32 Processadores AMD Sempron / Phenom II e 64 bits / Athlon II FSB Suporta as tecnologias Hyper Transport 3.0 Suporta a tecnologia HyperTransport 3.0 com uma largura de banda até 5.
TA890FXE ESPECIFICAÇÕES Conectores na placa Conector IDE x1 Cada conector suporta 2 dispositivos IDE Conector SATA x5 Cada conector suporta 1 dispositivo SATA Conector do painel frontal x1 Para suporte de várias funções no painel frontal Conector de áudio frontal x1 Suporta a função de áudio no painel frontal Conector de saída S/PDIF x1 Suporta a saída de áudio digital Conector de IR do consumidor x1 Conector da ventoinha da CPU x1 Conector da ventoinha do sistema x2 Conector para lim
Motherboard Manual POLISH SPEC Procesor FSB Socket AM3 Architektura AMD 64 umożliwia przetwarzanie 32 i 64 AMD Sempron / Phenom II / Athlon II bitowe Procesory Obsługa Hyper Transport 3.0 Obsługa HyperTransport 3.0 o szerokości pasma do 5.2 GT/s Chipset AMD 890FX AMD SB850 Gniazda DDR3 DIMM x 4 Moduł pamięci DDR3 z trybem podwójnego kanału Pamięć główna Maks.
TA890FXE SPEC Złącze IDE x1 Każde złącze obsługuje 2 urządzenia IDE Złącze SATA x5 Każde złącze obsługuje 1 urządzenie SATA Złącze panela przedniego x1 Obsługa elementów panela przedniego Przednie złącze audio x1 Obsługa funkcji audio na panelu przednim Złącze wyjścia S/PDIF x1 Obsługa funkcji cyfrowego wyjścia audio Złącze Konsument IR x1 Złącze główkowe wentylatora procesora Złącza Zasilanie wentylatora procesora (z funkcją Smart Fan) x1 Złącze główkowe wentylatora wbudowane systemoweg
Motherboard Manual RUSSIAN СПЕЦ CPU (центральн ый Гнездо AM3 Архитектура AMD 64 разрешать обработка Процессоры AMD Sempron / Phenom II / данных на 32 и 64 бит процессор) Athlon II FSB Поддержка Hyper Transport 3.0 Поддержка HyperTransport 3.0 с пропускной способностью до 5.
TA890FXE СПЕЦ Разъём IDE x1 Разъём SATA x5 Каждый разъём поддерживает 1 устройство SATA Разъём на лицевой панели x1 Поддержка устройств на лицевой панели Входной звуковой разъём x1 Разъём вывода для S/PDIF x1 Разъём едока ИКЫЙ x1 Встроенны вентилятора центрального процессора x1 Контактирующее приспособление вентилятора системы Поддержка звуковых функций на лицевой панели Поддержка вывода цифровой звуковой функции Источник питания для вентилятора центрального Контактирующее приспособление й
Motherboard Manual ARABIC اﻟﻤﻮاﺻﻔﺎت إﺝﺮاء اﻟﻌﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ 32و 64ﺏﺖAMD 64ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ AM3ﻡﻘﺒﺲ اﻟﻤﺮآﺰﻳﺔ AMD Sempron / Phenom II / Athlon IIﻡﻌﺎﻟﺠﺎت و Hyper Transport3.0ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ 5.2ﺏﺘﺮدد ﻳﺼﻞ إﻟﻰ HyperTransport 3.
TA890FXE اﻟﻤﻮاﺻﻔﺎت ﻡﻨﻔﺬ IDE ﻋﺪد 1 IDEﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ اﺙﻨﻴﻦ ﻡﻦ أﺝﻬﺰة ﻡﻨﻔﺬ SATA ﻋﺪد5 SATAﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ واﺣﺪ ﻡﻦ أﺝﻬﺰة ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻋﺪد 1 ﻳﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ ﻋﺪد 1 ﻳﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺏﺎﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻡﻨﻔﺬ ﺥﺮج S/PDIF ﻋﺪد 1 ﻳﺪﻋﻢ وﻇﻴﻔﺔ ﺥﺮج اﻟﺼﻮت اﻟﺮﻗﻤﻲ ﻡﻨﻔﺬ اﻷﺣﻤﺮ ﺗﺤ ﺖ ﻡﺴ ﺘﻬﻠﻜﺔ ﻋﺪد 1 اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ ﻋﺪد 1 Smart Fanﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ ﻡﻊ وﻇﻴﻔﺔ اﻟﻠ
Motherboard Manual JAPANESE 仕様 Socket AM3 CPU AMD 64アーキテクチャでは、32ビットと64ビット計算が AMD Sempron / Phenom II / Athlon II プロセ 可能です ッサ FSB ハイパートランスポート3.0サポートします 5.2 GT/sのバンド幅までハイパートランスポート 3.
TA890FXE 仕様 オンボードコ IDEコネクタ x1 各コネクタは2つのIDEデバイスをサポートします SATAコネクタ x5 各コネクタは1つのSATAデバイスをサポートします フロントパネルコネクタ x1 フロントパネル機能をサポートします フロントオーディオコネクタ x1 フロントパネルオーディオ機能をサポートします S/PDIFアウトコネクタ x1 デジタルオーディオアウト機能をサポートします 消費者IRコネクタ x1 CPUファンヘッダ x1 CPUファン電源装置(スマートファン機能を搭載) システムファンヘッダ x2 システムファン電源装置 CMOSクリアヘッダ x1 USBコネクタ x3 ネクタ 各コネクタは2つのフロントパネルUSBポートをサポート します 背面パネル I/O IEEE 1394コネクタ x1 シリアルポート x1 電源コネクタ(24ピン) x1 電源コネクタ(8ピン) x1 PS/2キーボード x1 PS/2マウス x1 光学+coaxial S/PDIFアウト x1 1394ポ