TA890GXE / TA880GXE Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Chapter 1: Introduction ........................................ 1 1.1 1.2 1.3 1.4 1.5 Before You Start ................................................................................ 1 Package Checklist ............................................................................. 1 Motherboard Features...................................................................... 2 Rear Panel Connectors ..................................................................... 3 Motherboard Layout...
TA890GXE / TA880GXE CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU START Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: 1.2 Prepare a dry and stable working environment with sufficient lighting. Always disconnect the computer from power outlet before operation.
Motherboard Manual 1.3 CPU FSB Chipset Super I/O Main Memory Graphics IDE SATA III LAN Sound IEEE 1394 Slots On Board Connector 2 MOTHERBOARD FEATURES TA890GXE Socket AM3 AMD Phenom II / Athlon II / Sempron processors AMD 64 Architecture enables 32 and 64 bit computing Supports Hyper Transport 3.0 and Cool=n=Quiet (Maximum Watt: 140W) Support HyperTransport 3.0 Supports up to 5.
TA890GXE / TA880GXE TA890GXE System Fan Header CMOS clear Header USB Connector IEEE 1394 Connector Consumer IR Connector Power Connector (24pin) Power Connector (4pin) Serial Port Connector Back Panel I/O Board Size Special Features x2 x1 x3 x1 x1 x1 x1 x1 TA880GXE System Fan Header CMOS clear Header USB Connector IEEE 1394 Connector Consumer IR Connector Power Connector (24pin) Power Connector (4pin) Serial Port Connector PS/2 Keyboard x1 PS/2 Keyboard x1 PS/2 Mouse x1 PS/2 Mouse x1 S/PDIF Out
Motherboard Manual 1.5 MOTHERBOARD LAYOUT PH2 PH4 PH_CPUNB KBMS1 P H3 PH1 F_1394A 1 SPDIF1 DIMMB2 DIMMA2 DIMMB1 IDE1 S ocket A M 3 DVI VGA JUSBV1 DIMMA1 HDMI1 ATXPWR2 USB_1394_ ESATA1 RJ45USB1 LAN CPU_FAN1 AUDIO2 AMD 890GX/ 880G ATX P WR 1 PEX1_1 LED2 LED1 S ATA3 SY S _FA N2 P EX 16_1 PCI1 SATA 1 BAT1 PCI2 C IR 1 J_CO M1 SY S _FA N1 PAN EL1 JCMOS1 JUSBV2 F_USB1 F_USB2 JSP DI FO UT1 Note: ■ represents the 1st pin.
TA890GXE / TA880GXE CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Step 1: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle. Step 2: Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle. The CPU will fit only in the correct orientation.
Motherboard Manual Step 3: Hold the CPU down firmly, and then close the lever toward direct B to complete the installation. Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to CPU_FAN1 to complete the installation.
TA890GXE / TA880GXE 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
Motherboard Manual 2.3 INSTALLING SYSTEM MEMORY 8 DIMMB2 DIMMA2 DIMMB1 DIMMA1 A. DDR3 Modules 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.
TA890GXE / TA880GXE B. Memory Capacity DIMM Socket Location DDR3 Module DIMMA1 512MB/1GB/2GB/4GB DIMMB1 DIMMA2 DIMMB2 512MB/1GB/2GB/4GB 512MB/1GB/2GB/4GB 512MB/1GB/2GB/4GB Total Memory Size Max is 16GB. C. Dual Channel Memory installation Please refer to the following requirements to activate Dual Channel function: Install memory module of the same density in pairs, shown in the table.
Motherboard Manual CONNECTORS AND SLOTS IDE1: IDE/ATAPI Connector The motherboard has a 32-bit Enhanced IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality. 40 39 2 1 SATA1~SATA3: Serial ATA Connectors The motherboard has a PCI to SATA Controller with 5 channels SATA interface, it satisfies the SATA 3.0 spec and with transfer rate of 6.0Gb/s.
TA890GXE / TA880GXE ATXPWR1: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. Pin 13 14 15 16 17 18 19 20 21 22 23 24 Assignment +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground 12 24 1 13 Pin 1 2 3 4 5 6 7 8 9 10 11 12 Assignment +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.3V ATXPWR2: ATX Power Source Connector Connecting this connector will provide +12V to CPU power circuit.
Motherboard Manual PEX16_1: PCI-Express Gen2 x16 Slot - PCI-Express 2.0 compliant. Maximum theoretical realized bandwidth of 8GB/s simultaneously per direction, for an aggregate of 16GB/s totally. PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins. 2X bandwidth over the PCI-Express 1.1 architecture. PEX1_1: PCI-Express Gen 2 x1 Slot - PCI-Express 2.0 compliant. Data transfer bandwidth up to 250MB/s per direction; 500MB/s in total. PCI-Express Gen2 supports a raw bit-rate of 2.
TA890GXE / TA880GXE CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DETAIL SETTINGS PANEL1: Front Panel Header This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.
Motherboard Manual JCMOS1: Clear CMOS Header Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard. 1 3 Pin 1-2 Close: Normal Operation (default). 1 1 3 Pin 2-3 Close: Clear CMOS data. 3 ※ Clear CMOS Procedures: 1. 2. 3. 4. 5. 6. Remove AC power line. Set the jumper to “Pin 2-3 close”. Wait for five seconds. Set the jumper to “Pin 1-2 close”. Power on the AC.
TA890GXE / TA880GXE JUSBV1/JUSBV2: Power Source Headers for USB Ports Pin 1-2 Close: JUSBV1: +5V for USB ports at USB_1394_ESATA1/RJ45USB1. JUSBV2: +5V for USB ports at F_USB1/F_USB2/F_USB3. Pin 2-3 Close: JUSBV1: +5V STB for USB ports at USB_1394_ESATA1/RJ45USB1. JUSBV2: +5V STB for USB ports at F_USB1/F_USB2/F_USB3.
Motherboard Manual JSPDIFOUT1: Digital Audio-out Connector This connector allows user to connect the PCI bracket SPDIF output header. Pin 1 2 3 1 Assignment +5V SPDIF_OUT Ground 3 J_COM1: Serial Port Connector The motherboard has a Serial Port Connector for connecting RS-232 Port.
TA890GXE / TA880GXE On-Board LED Indicators PH1 PH2 PH3 PH4 PH_CPUNB There are 7 LED indicators showing system status. LED2 LED1 LED1 & LED2: Debug Indicators PH_CPUNB/ PH1 ~ PH4: Power Status Indicators Please refer to the tables below for specific messages: LED1 ON ON OFF OFF LED2 ON OFF ON OFF PH_CPUNB/PH1~PH4 ON OFF Message Normal Memory Error VGA Error Abnormal: CPU / Chipset error. Phase Indicator Phase Active Phase Disable On-Board Buttons There are 2 on-board buttons.
Motherboard Manual F_1394A1: IEEE 1394 Header This header allows user to connect IEEE 1394 device. 9 1 10 2 Pin 1 2 3 4 5 6 7 8 9 10 Assignment TPA1+ TPA1GND GND TPB1+ TPB1VCC VCC N/A KEY CIR1: Consumer IR Connector This header is for infrared remote control and communication. This function is available only in Windows 7, Windows Vista, and Windows MCE.
TA890GXE / TA880GXE CHAPTER 4: HYBRID CROSSFIREX FUNCTION 4.1 HYBRID CROSSFIREX REQUIREMENTS A graphics card with Radeon HD5450 GPU. The graphics card driver should support Hybrid CrossFireX technology. The power supply unit must provide at least the minimum power required by the system, or the system will be unstable. A power supply above 450W is recommended under Hybrid CrossFireX mode. 4.2 HYBRID CROSSFIREX INSTALLATION Step 1: Insert the Hybrid CrossFireX-Ready graphics card into PEX16_1.
Motherboard Manual CHAPTER 5: RAID FUNCTIONS 5.1 OPERATING SYSTEM Supports Windows Vista and Windows 7. 5.2 RAID ARRAYS RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1: RAID 1 defines techniques for mirroring data. RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1. RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity. 5.
TA890GXE / TA880GXE RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure.
Motherboard Manual RAID 10: RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 10 solution for improved resiliency, performance and rebuild performance. Features and Benefits Drives: Minimum 4, and maximum is 6 or 8, depending on the platform. Benefits: Optimizes for both fault tolerance and performance, allowing for automatic redundancy. May be simultaneously used with other RAID levels in an array, and allows for spare disks.
TA890GXE / TA880GXE RAID 5: RAID 5 stripes both data and parity information across three or more drives. It writes data and parity blocks across all the drives in the array. Fault tolerance is maintained by ensuring that the parity information for any given block of data is placed on a different drive from those used to store the data itself. Features and Benefits Drives: Minimum 3. Uses: RAID 5 is recommended for transaction processing and general purpose service.
Motherboard Manual CHAPTER 6: T-SERIES BIOS & SOFTWARE 6.1 T-SERIES BIOS T-Series BIOS Features Overclocking Navigator Engine (O.N.E.) Memory Integration Test (M.I.T., under Overclock Navigator Engine) BIO-Flasher: Update BIOS file from USB Flash Drive or FDD Self Recovery System (S.R.S) Smart Fan Function CMOS Reloading Program !! WARNING !! For better system performance, the BIOS firmware is being continuously updated.
TA890GXE / TA880GXE Manual Overclock System (M.O.S.) MOS is designed for experienced overclock users. It allows users to customize personal overclock settings. Main Advanced PCIPnP BIOS SETUP UTILITY Boot Chipset T-Series T-Series Settings Exit Options Notice: Please Clear CMOS if system no display after overclocking.
Motherboard Manual Voltage Configuration Enter this function for more advanced voltage settings. DRAM Timing Configuration Enter this function for more advanced DRAM clock settings. Memory Configuration Enter this function for more advanced memory settings. NOTE Overclock is an optional process, but not a “must-do” process; it is not recommended for inexperienced users. Therefore, we will not be responsible for any hardware damage which may be caused by overclocking.
TA890GXE / TA880GXE V6 Tech Engine This engine will make a good over-clock performance. Main Advanced PCIPnP BIOS SETUP UTILITY Boot Chipset T-Series T-Series Settings Exit Options Notice: Please Clear CMOS if system no display after overclocking.
Motherboard Manual Notices: Not all types of AMD CPU perform above overclock setting ideally; the difference will be based on the selected CPU model. B. Memory Integration Test (M.I.T.) This function is under “Overclocking Navigator Engine” item. MIT allows users to test memory compatibilities, and no extra devices or software are needed. Step 1 The default setting under this item is “Disabled”; the condition parameter should be changed to “Enable” to proceed this test.
TA890GXE / TA880GXE C. BIO-Flasher BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive or floppy disk. The BIO-Flasher is built in the BIOS chip. To enter the utility, press during the Power-On Self Tests (POST) procedure while booting up. Updating BIOS with BIO-Flasher 1. Go to the website to download the latest BIOS file for the motherboard. 2. Then, save the BIOS file into a USB pen drive or a floppy disk. 3.
Motherboard Manual D. Self Recovery System (S.R.S.) This function can’t be seen under BIOS setup; and is always on whenever the system starts up. However, it can prevent system hang-up due to inappropriate overclock actions. When the system hangs up, S.R.S. will automatically log in the default BIOS setting, and all overclock settings will be re-configured. E. Smart Fan Function Smart Fan Function is under “Smart Fan Configuration” in “Advanced Menu”.
TA890GXE / TA880GXE Smart Fan Calibration Choose this item and then the BIOS will automatically test and detect the CPU/System fan functions and show CPU/System fan speed. Control Mode This item provides several operation modes of the fan. Fan Ctrl OFF(℃) If the CPU/System temperature is lower than the set value, the CPU/ System fan will turn off. The range is from 0~127, with an interval of 1. Fan Ctrl On(℃) The CPU/System fan starts to work when CPU/System temperature arrives to this set value.
Motherboard Manual 6.2 T-SERIES SOFTWARE Installing T-Series Software 1. Insert the Setup CD to the optical drive. The drivers installation program would appear if the Auto-run function has been enabled. 2. Select Software Installation, and then click on the respective software title. 3. Follow the on-screen instructions to complete the installation. Launching T-Series Software After the installation process is completed, you will see the software icon showing on the desktop.
TA890GXE / TA880GXE The CPU tab provides information on the CPU and motherboard. The Memory tab provides information on the memory module(s). You can select memory module on a specific slot to see its information. The OC Tweaker tab allows you to change system clock settings and voltages settings.
Motherboard Manual Six Pre-set Modes: V3, V6, V9, V12, V15, AUTO for different overclocking experience. The HW Monitor tab allows you to monitor hardware voltage, fan speed, and temperature. Besides, you also can set related values for CPU Smart Fan.
TA890GXE / TA880GXE Pressing TOVERCLOCKER logo will display information about manufacturer and software version. You can update currnet version by clicking the button “Live Update.” Green Power II Utility BIOSTAR G.P.U II (Green Power Utility) is a new function. The utility enhances energy efficiency by disabling extra phases while CPU is on light loading; it features 4+1 power phases, current power saving, and toal power saving.
Motherboard Manual G.P.U Mode Setting This utility provides five modes to improve system performance or to save power consumption upon your requirement. Note: Even if the modes which save more power consumption are chosen, the system still can keep excellent performance. 36 Auto Phase Mode System switches mode1 to mode 4 automatically according to current system loading condition. MODE 1: Max-Energy Mode This is the best system performance mode.
TA890GXE / TA880GXE eHot-Line (Optional) eHot-Line is a convenient utility that helps you to contact with our Tech-Support system. This utility will collect system information which is useful for analyzing the problem you may have encountered, and then send the information to our tech-support department to help you solve the problem. Before you use this utility, please set Outlook Express as your default e-mail client application program. represent s import ant *information that you must provide.
Motherboard Manual Enter the file name and then click “Save”. Your system information will be saved to a .txt file. Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail. We will not share customer’s data with any other third parties, so please feel free to provide your system information while using eHot-Line service.
TA890GXE / TA880GXE BIOS Update BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system. AWARD BIOS Show current BIOS information AMI BIOS Online Update function Clear CMOS function (Only for AMI BIOS) (Only for AWARD BIOS) Save current BIOS to a .bin file Update BIOS with a BIOS file Once click on this button, the saving dialog will show. Choose the position to save file and enter file name.
Motherboard Manual Before doing this, please download the proper BIOS file from the website. For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first. Then click Update BIOS button, a dialog will show for asking you backup current BIOS. Click Yes for BIOS backup and refer to the Backup BIOS procedure; or click No to skip this procedure.
TA890GXE / TA880GXE (for AMI BIOS only) Automatically download and update the latest BIOS via internet; make sure that the computer is connected to the internet before using this function. After clicking on the Onlinr Update button, the utility will search for the latest BIOS from internet. If there is a new BIOS version, the utility will ask you to download it. Click Yes to proceed.
Motherboard Manual CHAPTER 7: USEFUL HELP 7.1 DRIVER INSTALLATION NOTE After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.
TA890GXE / TA880GXE 7.2 EXTRA INFORMATION CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3.
Motherboard Manual 7.3 AMI BIOS BEEP CODE Boot Block Beep Codes Number of Beeps 1 2 3 4 5 7 10 11 12 13 Description No media present. (Insert diskette in floppy drive A:) “AMIBOOT.ROM” file not found in root directory of diskette in A: Insert next diskette if multiple diskettes are used for recovery Flash Programming successful File read error No Flash EPROM detected Flash Erase error Flash Program error “AMIBOOT.
TA890GXE / TA880GXE 7.4 TROUBLESHOOTING Probable 1. There is no power in the system. Power LED does not shine; the fan of the power supply does not work 2. Indicator light on keyboard does not shine. System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running. System does not boot from a hard disk drive, but can be booted from optical drive. Solution 1. 2. 3. Make sure power cable is securely plugged in. Replace cable. Contact technical support.
Motherboard Manual APPENDIX: SPEC IN OTHER LANGUAGES GERMAN TA890GXE CPU TA880GXE Sockel AM3 Sockel AM3 AMD Phenom II / Athlon II / Sempron AMD Phenom II / Athlon II / Sempron Prozessoren Prozessoren Die AMD 64-Architektur unterstützt eine 32-Bit- Die AMD 64-Architektur unterstützt eine 32-Bitund 64-Bit-Datenverarbeitung und 64-Bit-Datenverarbeitung Unterstützt Hyper Transport 3.0 und Cool’n’Quiet Unterstützt Hyper Transport 3.
TA890GXE / TA880GXE TA890GXE HD TA880GXE ALC892 ALC892 Audio-Unters 7.1-Kanal-Audioausgabe tützung Unterstützt High-Definition Audio IEEE 1394 VIA VT6330 Steckplätze 7.
Motherboard Manual FRENCH TA890GXE UC Bus frontal Chipset Super E/S TA880GXE Socket AM3 Socket AM3 Processeurs AMD Phenom II / Athlon II / Processeurs AMD Phenom II / Athlon II / Sempron Sempron L'architecture AMD 64 permet le calcul 32 et 64 L'architecture AMD 64 permet le calcul 32 et 64 bits bits Prend en charge Hyper Transport 3.0 et Prend en charge Hyper Transport 3.0 et Cool’n’Quiet Cool’n’Quiet (Watt maximum : 140W) (Watt maximum : 140W) Prend en charge Hyper Transport 3.
TA890GXE / TA880GXE TA890GXE TA880GXE Prise en ALC892 ALC892 charge Sortie audio à 7.1 voies Sortie audio à 7.
Motherboard Manual ITALIAN TA890GXE CPU FSB Chipset Socket AM3 Processori AMD Phenom II / Athlon II / Processori AMD Phenom II / Athlon II / Sempron L’architettura AMD 64 abilita la Sempron L’architettura AMD 64 abilita la computazione 32 e 64 bit computazione 32 e 64 bit Supporto di Hyper Transport 3.0 e Supporto di Hyper Transport 3.0 e Cool’n’Quiet Cool’n’Quiet (Watt massimo: 140W) (Watt massimo: 140W) Supporto di HyperTransport 3.0 fino a 5.2 Supporto di HyperTransport 3.0 fino a 5.
TA890GXE / TA880GXE TA890GXE Supporto audio HD TA880GXE ALC892 ALC892 Uscita audio 7.1 canali Uscita audio 7.
Motherboard Manual SPANISH TA890GXE CPU FSB TA880GXE Conector AM3 Conector AM3 Procesadores AMD Phenom II / Athlon II / Procesadores AMD Phenom II / Athlon II / Sempron Sempron La arquitectura AMD 64 permite el procesado de La arquitectura AMD 64 permite el procesado de 32 y 64 bits 32 y 64 bits Soporta las tecnologías Hyper Transport 3.0 y Soporta las tecnologías Hyper Transport 3.0 y Cool’n’Quiet Cool’n’Quiet (Vatio máximo: 140W) (Vatio máximo: 140W) Admite HyperTransport 3.
TA890GXE / TA880GXE TA890GXE Soporte de sonido HD IEEE 1394 Ranuras TA880GXE ALC892 ALC892 Salida de sonido de 7.1 canales Salida de sonido de 7.
Motherboard Manual PORTUGUESE TA890GXE Socket AM3 Processadores AMD Phenom II / Athlon II / CPU FSB Chipset Sempron Sempron A arquitectura AMD 64 permite uma computação A arquitectura AMD 64 permite uma computação de 32 e 64 bits Suporta as tecnologias Hyper Transport 3.0 e Cool’n’Quiet de 32 e 64 bits Suporta as tecnologias Hyper Transport 3.0 e Cool’n’Quiet (Watt máximo: 140W) (Watt máximo: 140W) Suporta a tecnologia HyperTransport 3.0 com Suporta a tecnologia HyperTransport 3.
TA890GXE / TA880GXE TA890GXE Suporte para áudio de alta definição TA880GXE ALC892 Saída de áudio de 7.1 canais Suporta a especificação High-Definition Audio ALC892 Saída de áudio de 7.
Motherboard Manual POLISH TA890GXE Socket AM3 TA880GXE Socket AM3 AMD Phenom II / Athlon II / Sempron Procesory AMD Phenom II / Athlon II / Sempron Procesory Procesor FSB Chipset Architektura AMD 64 umożliwia przetwarzanie Architektura AMD 64 umożliwia przetwarzanie 32 i 64 bitowe 32 i 64 bitowe Obsługa Hyper Transport 3.0 oraz Cool’n’Quiet Obsługa Hyper Transport 3.0 oraz Cool’n’Quiet (Maksymalny Watt: 140W) (Maksymalny Watt: 140W) Obsługa HyperTransport 3.
TA890GXE / TA880GXE TA890GXE Obsługa audio HD IEEE 1394 Gniazda TA880GXE ALC892 ALC892 7.1 kanałowe wyjście audio 7.
Motherboard Manual RUSSIAN TA890GXE Гнездо AM3 Процессоры AMD Phenom II / Athlon II / CPU Sempron (центральный Архитектура AMD 64 разрешать обработка данных на 32 и 64 бит процессор) Поддержка Hyper Transport 3.0 и Cool’n’Quiet (Максимальный ватт: 140W) TA880GXE Гнездо AM3 Процессоры AMD Phenom II / Athlon II / Sempron Архитектура AMD 64 разрешать обработка данных на 32 и 64 бит Поддержка Hyper Transport 3.0 и Cool’n’Quiet (Максимальный ватт: 140W) FSB Поддержка HyperTransport 3.
TA890GXE / TA880GXE TA890GXE Звуковая поддержка жесткого диска IEEE 1394 Слоты Встроенный разъём ALC892 Звуковая поддержка High-Definition 7.
Motherboard Manual ARABIC TA890GXE وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ اﻟﻨﺎﻗﻞ اﻷﻣﺎﻣﻲ اﻟﺠﺎﻥﺒﻲ ﻣﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ Super I/O AM3ﻣﻘﺒﺲ AM3ﻣﻘﺒﺲ AMD Phenom II / Athlon II / Sempronﻣﻌﺎﻟﺠﺎت AMD Phenom II / Athlon II / Sempronﻣﻌﺎﻟﺠﺎت إﺝﺮاء اﻟﻌﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ 32و 64ﺏﺖAMD 64ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ إﺝﺮاء اﻟﻌﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ 32و 64ﺏﺖAMD 64ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ Cool’n’Quietو Hyper Transport 3.0ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ Cool’n’Quietو Hyper Transport 3.
TA890GXE / TA880GXE TA890GXE IEEE 1394 TA880GXE VIA VT6330 VIA VT6330 ﻓﺘﺤﺔ PCI Express Gen2 x16 ﻋﺪد 1 ﻓﺘﺤﺔ PCI Express Gen2 x 1 ﻋﺪد 1 ﻓﺘﺤﺔ PCI Express Gen2 x 1 ﻓﺘﺤﺔ PCI ﻋﺪد2 ﻓﺘﺤﺔ PCI ﻣﻨﻔﺬ IDE ﻋﺪد 1 ﻣﻨﻔﺬ IDE ﻋﺪد 1 ﻣﻨﻔﺬ SATA ﻋﺪد5 ﻣﻨﻔﺬ SATA ﻋﺪد5 ﻣﻨﻔﺬ اﻟﻠﻮﺡﺔ اﻷﻣﺎﻣﻴﺔ ﻋﺪد 1 ﻣﻨﻔﺬ اﻟﻠﻮﺡﺔ اﻷﻣﺎﻣﻴﺔ ﻋﺪد 1 ﻣﻨﻔﺬ اﻟﺼﻮت اﻷﻣﺎﻣﻲ ﻋﺪد 1 ﻣﻨﻔﺬ اﻟﺼﻮت اﻷﻣﺎﻣﻲ ﻋﺪد 1 ﻣﻨﻔﺬ ﺥﺮج S/PDIF ﻋﺪد 1
Motherboard Manual JAPANESE TA890GXE Socket AM3 TA880GXE Socket AM3 AMD Phenom II / Athlon II / Sempron プロセッサ AMD Phenom II / Athlon II / Sempron プロセッサ AMD 64アーキテクチャでは、32ビットと64ビット計 AMD 64アーキテクチャでは、32ビットと64ビット計 CPU FSB チップセット 算が可能です 算が可能です ハイパートランスポート3.0とクールアンドクワイア ハイパートランスポート3.0とクールアンドクワイア ットをサポートします ットをサポートします (最高のワット: 140W) (最高のワット: 140W) 5.2 GT/s (OC)のバンド幅までハイパートランスポー 5.2 GT/s (OC)のバンド幅までハイパートランスポー ト3.0をサポートします ト3.
TA890GXE / TA880GXE TA890GXE HDオーディ オのサポート IEEE 1394 スロット ALC892 ALC892 7.1チャンネルオーディオアウト 7.