TZ77XE3/TZ75XE3 S etup Man ual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Chapter 1: Introduction ........................................ 1 1.1 1.2 1.3 1.4 1.5 Before You Start......................................................................................... 1 Package Checklist ..................................................................................... 1 Motherboard Features .............................................................................. 2 Rear Panel Connectors.....................................................................
TZ7 7 X E3 / TZ7 5 X E3 CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU START Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: 1.2 Prepare a dry and stable working environment with sufficient lighting. Always disconnect the computer from power outlet before operation.
Motherboard Manual 1.3 MOTHERBOARD FEATURES SPEC Supports Execute Disable Bit / Enhanced Intel Socket 1155 SpeedStep® / Intel Architecture-64 / Extended CPU Intel Core i7 / i5 / i3 / Pentium / Celeron Memory 64 Technology / Virtualization Technology / processor Hyper Threading Intel Z77 (TZ77XE3) Chipset Intel Z75 (TZ75XE3) IT8728 Environment Control initiatives, Provides the most commonly used legacy Hardware Monitor Controller Super I/O functionality.
TZ7 7 X E3 / TZ7 5 X E3 SATA3 Connector x2 Each connector supports 1 SATA3 devices SATA2 Connector x4 Each connector supports 1 SATA2 devices Front Panel Connector x1 Supports front panel facilities Front Audio Connector x1 Supports front panel audio function CPU Fan Header x1 CPU Fan power supply (with Smart Fan function) System Fan Header x2 System Fan Power supply Clear CMOS Header x1 Restore CMOS data to factory default USB2.
Motherboard Manual 1.4 REAR PANEL CONNECTORS PS/2 Keyboard USB2.0X2 LAN VGA HDMI DVI-D USB3.0X2 USB2.0X2 Center Line In Rear Line Out Side Mic In NOTE: USB3.0 ports (only supported by Windows 7) are backward compatible with USB2.0/USB1.X devices. NOTE: Maximum resolution: HDMI: 1920 x 1200 @60Hz, compliant with HDMI 1.
TZ7 7 X E3 / TZ7 5 X E3 1.5 MOTHERBOARD LAYOUT USB_KBMS1 HDMI1 CPU_FAN1 ATXPWR2 DDR3_ B2 DDR3_B1 CPU 1 DDR3_A2 DDR3_A1 DVI1 VGA1 Socket 1155 USB3_0 RJ45USB1 AUDIO1 SYS_FAN2 ATXPWR1 PEX16_1 LAN PEX1_1 Intel Z77/ Z75 PEX1_2 F_AUDIO1 BIOS PEX16_2 JCMOS1 CODEC PCI1 PCI2 JFRONT_USB3_1 SATA6 SATA5 PEX16_3 JSPDIFOUT1 SATA4 SATA3 SATA2 SATA1 SW_RST1 SYS_FAN1 CIR1 BAT1 Super I/O J_COM1 F_USB1 F_USB2 SW_PW R1 PANEL1 Note: ■ represents the 1st pin.
Motherboard Manual CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Notice: 1. 2. Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be damaged. The motherboard might equip with two different types of pin cap. Please refer below instruction to remove the pin cap. Step 1: Pull the socket locking lever out from the socket and then raise the lever up.
TZ7 7 X E3 / TZ7 5 X E3 Step 3: Hold processor with your thumb and index fingers, oriented as shown. Align the notches with the socket. Lower the processor straight down without tilting or sliding the processor in the socket. Step 4: Hold the CPU down firmly, and then lower the lever to locked position to complete the installation. Step 5: Put the CPU Fan and heatsink assembly on the CPU and buckle it on the retention frame. Connect the CPU FAN power cable into the CPU_FAN1 to complete the installation.
Motherboard Manual 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
TZ7 7 X E3 / TZ7 5 X E3 2.3 INSTALLING SYSTEM MEMORY DDR3_B1 DDR3_B2 DDR3_A1 DDR3_A2 A. Memory Modules 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated. Note: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
Motherboard Manual B. Memory Capacity DIMM Socket Location DDR3 Module DDR3_A1 512MB/1GB/2GB/4GB/8GB DDR3_A2 512MB/1GB/2GB/4GB/8GB DDR3_B1 512MB/1GB/2GB/4GB/8GB DDR3_B2 512MB/1GB/2GB/4GB/8GB Total Memory Size Max is 32GB. C. Dual Channel Memory Installation Please refer to the following requirements to activate Dual Channel function: Install memory module of the same density in pairs, shown in the table.
TZ7 7 X E3 / TZ7 5 X E3 2.4 CONNECTORS AND SLOTS SATA1/SATA2: Serial ATA3.0 Connectors The motherboard has a PCI to SATA Controller with 2 channels SATA interface, it satisfies the SATA 3.0 spec and with transfer rate of 6.0Gb/s. Pin 1 2 3 4 5 6 7 SATA2 SATA1 7 4 Assignment Ground TX+ TXGround RXRX+ Ground 1 SATA3 ~ 6: Serial ATA2.0 Connectors The motherboard has a PCI to SATA Controller with 4 channels SATA2 interface, it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.
Motherboard Manual PEX16_1/ PEX16_2: PCI-Express Gen3 x16 (x16 / x8) (Nvidia SLI and AMD CrossFireX) Slots - PCI-Express 3.0 compliant. Maximum theoretical realized bandwidth of 16GB/s simultaneously per direction, for an aggregate of 32GB/s totally. The speed of PEX16_1 is x16, or x8 when SLI / CFX is enabled; the speed of PEX16_2 is x8. PCI-E 3.0 is supported by Core i7-3xxx / i5-3xxx CPU. Note: For more details about Nvidia SLI and AMD CrossFireX, please access the website, respectively: http://www.
TZ7 7 X E3 / TZ7 5 X E3 PCI1/PCI2: Peripheral Component Interconnect Slots This motherboard is equipped with 2 standard PCI slots. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits. PCI 1 PCI2 ATXPWR2: ATX Power Source Connectors These connectors provide +12V to CPU power circuit. If the CPU power plug is 4-pin, please plug it into Pin 1-2-5-6 of ATXPWR2.
Motherboard Manual ATXPWR1: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. Pin 13 14 15 16 17 18 19 20 21 22 23 24 Assignment +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground 12 24 1 13 Pin 1 2 3 4 5 6 7 8 9 10 11 12 Assignment +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.
TZ7 7 X E3 / TZ7 5 X E3 CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DETAIL SETTINGS PANEL1: Front Panel Header This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.
Motherboard Manual F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel These headers allow user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader. F_ USB 1 F_ US B2 2 10 1 9 Pin 1 2 3 4 5 6 7 8 9 10 Assignment +5V (fused) +5V (fused) USBUSBUSB+ USB+ Ground Ground Key NC JFRONT_USB3_1: Header for USB 3.
TZ7 7 X E3 / TZ7 5 X E3 F_AUDIO1: Front Panel Audio Header This header allows user to connect the front audio output cable with the PC front panel. This header supports HD and AC’97 audio front panel connector. 2 10 1 9 Pin 1 2 3 4 5 6 7 8 9 10 Assignment Mic Left in Ground Mic Right in GPIO Right line in Jack Sense Front Sense Key Left line in Jack Sense JSPDIFOUT1: Digital Audio-out Connector This connector allows user to connect the PCI bracket SPDIF output header.
Motherboard Manual JCMOS1: Clear CMOS Header Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard. 1 3 Pin 1-2 Close: Normal Operation (default). 1 3 1 3 Pin 2-3 Close: Clear CMOS data. ※ Clear CMOS Procedures: 1. 2. 3. 4. 5. 6. Remove AC power line. Set the jumper to “Pin 2-3 close”. Wait for five seconds. Set the jumper to “Pin 1-2 close”. Power on the AC.
TZ7 7 X E3 / TZ7 5 X E3 BIOS POST Code/CPU Temperature Indicator This indicator will show POST code while booting. After the booting sequence, it will show current CPU temperature through hexadecimal figure. Please refer to Chapter 6.3 for all the BIOS POST codes. On-Board Buttons There are 2 on-board buttons. SW_PWR1 SW_RST1 SW_RST1: Reset button. SW_PWR1: Power Switch button.
Motherboard Manual CHAPTER 4: RAID / AHCI FUNCTIONS 4.1 OPERATING SYSTEM SATA CHIP Controller Supporting OS Configuration Intel Z77 / Z75 AHCI SATA1/SATA2/ SATA3/SATA4/ Windows XP SP2 (32 and 64 bit) Windows Vista SP2 (32 and 64 bit) Windows 7 (32 and 64 bit) SATA5/SATA6 Intel Z77 / Z75 SATA1/SATA2/ SATA3/SATA4/ RAID Windows XP SP2 (32 and 64 bit) Windows Vista SP2 (32 and 64 bit) Windows 7 (32 and 64 bit) SATA5/SATA6 The 'F6 Method'+ to enable RAID / AHCI Driver when installing Windows XP 1.
TZ7 7 X E3 / TZ7 5 X E3 Enable RAID / AHCI Driver when installing Windows 7/Vista 1. Before you start Windows installation, copy the proper files for the Windows version to any USB storage.
Motherboard Manual 4.3 HOW RAID WORKS RAID 0: The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks up a large file into smaller blocks and performs disk reads and writes across multiple drives in parallel. The size of each block is determined by the stripe size parameter, which you set during the creation of the RAID set based on the system environment. This technique reduces overall disk access time and offers high bandwidth.
TZ7 7 X E3 / TZ7 5 X E3 RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure.
Motherboard Manual RAID 10: RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 10 solution for improved resiliency, performance and rebuild performance. Features and Benefits Drives: Minimum 4, and maximum is 6 or 8, depending on the platform. Benefits: Optimizes for both fault tolerance and performance, allowing for automatic redundancy. May be simultaneously used with other RAID levels in an array, and allows for spare disks.
TZ7 7 X E3 / TZ7 5 X E3 RAID 5: RAID 5 stripes both data and parity information across three or more drives. It writes data and parity blocks across all the drives in the array. Fault tolerance is maintained by ensuring that the parity information for any given block of data is placed on a different drive from those used to store the data itself. Features and Benefits Drives: Minimum 3. Uses: RAID 5 is recommended for transaction processing and general purpose service.
Motherboard Manual 4.4 INTEL SMART RESPONSE TECHNOLOGY With Intel(R) Smart Response Technology, the performance of RAID with an Intel SSD drive can be improved better. This function is only for TZ77XE3. Installing Smart Response Technology 1. Install RAID drives (RAID 0, 1, 5) and an Intel SSD. 2. Activate RAID mode from BIOS, and install operating system. 3. Insert the Setup DVD to the optical drive, and Install all drivers (including Intel(R) Smart Response Technology Driver).
TZ7 7 X E3 / TZ7 5 X E3 CHAPTER 5: T-SERIES UEFI BIOS & SOFTWARE 5.1 T-SERIES UEFI BIOS T-Series UEFI BIOS Features Overclocking Navigator Engine (O.N.E.) Self Recovery System (S.R.S) Smart Fan Function BIO-Flasher: Update UEFI BIOS file from USB Flash Drive !! WARNING !! For better system performance, the UEFI BIOS firmware is being continuously updated.
Motherboard Manual NOTE Overclock is an optional process, but not a “must-do” process; it is not recommended for inexperienced users. Therefore, we will not be responsible for any hardware damage which may be caused by overclocking. We also would not guarantee any overclocking performance. B. Self Recovery System (S.R.S.) This function can’t be seen under UEFI BIOS setup, and is always on whenever the system starts up. However, it can prevent system hang-up due to inappropriate overclock actions.
TZ7 7 X E3 / TZ7 5 X E3 CPU Smart FAN This item allows you to control the CPU Smart Fan function. CPU FAN Calibrate Press [ENTER] to calibrate CPU FAN. Control Mode This item provides several operation modes of the fan. Fan Ctrl OFF(℃) When CPU temperature is lower than this value, the CPU fan will keep lowest RPM. The range is from 0~127, with an interval of 1. Fan Ctrl On(℃) When CPU temperature is higher than this value, the CPU fan controller will turn on.
Motherboard Manual 5.2 T-SERIES SOFTWARE Installing T-Series Software 6. Insert the Setup DVD to the optical drive. The driver installation program would appear if the Auto-run function has been enabled. 7. Select Software Installation, and then click on the respective software title. 8. Follow the on-screen instructions to complete the installation. Launching T-Series Software After the installation process is completed, you will see the software icon showing on the desktop.
TZ7 7 X E3 / TZ7 5 X E3 The CPU tab provides information on the CPU and motherboard. The Memory tab provides information on the memory module(s). You can select memory module on a specific slot to see its information. The OC Tweaker tab allows you to change system clock settings and voltages settings.
Motherboard Manual 3 Pre-set Modes: V6, V12, AUTO for different overclocking experience. The HW Monitor tab allows you to monitor hardware voltage, fan speed, and temperature. Besides, you also can set related values for CPU Smart Fan.
TZ7 7 X E3 / TZ7 5 X E3 Pressing TOVERCLOCKER logo displays information about manufacturer and software version. You can update current version by clicking the button “Live Update.” Green Power II Utility BIOSTAR G.P.U II (Green Power Utility) is a new function. The utility enhances energy efficiency by disabling extra phases while CPU is on light loading; it features 4+1 power phases, current power saving, and toal power saving.
Motherboard Manual G.P.U Mode Setting This utility provides five modes, upon your requirements, to improve system performance or to save power consumption. Note: Even if the modes saving more power consumption are chosen, the system still can keep excellent performance. 34 Auto Phase Mode System switches the mode automatically according to current system loading condition. Performance Mode This is the mode saving power consumption most. Least energy will be used in the system.
TZ7 7 X E3 / TZ7 5 X E3 Guide of Lucid VIRTU MVP Installation With Lucid VIRTU MVP solution, the resource and performance of graphics can be integrated so that user can choose the suitable mode for the requirement.
Motherboard Manual Software Installation 1. Install VGA Driver and VIRTU MVP Software. 2. If for some reason auto-activation process fails, or the internet is not available for 30 days, user will have to manually activate Virtu Universal MVP by pressing “Activate” button through the Internet. 3. When Virtu Universal MVP successfully activates, the screen will look like this. 4. After installation, please restart the computer. The left screenshot is control panel.
TZ7 7 X E3 / TZ7 5 X E3 eHot-Line (Optional) eHot-Line is a convenient utility that helps you to contact with our Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem. Before you use this utility, please set Outlook Express as your default e-mail client application program. represent s import ant *information that you must provide.
Motherboard Manual Enter the file name and then click “Save”. Your system information will be saved to a .txt file. Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail. We will not share customer’s data with any other third parties, so please feel free to provide your system information while using eHot-Line service.
TZ7 7 X E3 / TZ7 5 X E3 BIOS Update BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system. AWARD BIOS Show current BIOS information AMI BIOS Clear CMOS function (Only for AWARD BIOS) Save current BIOS to a .bin file Update BIOS with a BIOS file Once click on this button, the saving dialog will show. Choose the position to save file and enter file name.
Motherboard Manual Before doing this, please download the proper BIOS file from the website. For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first. Then click Update BIOS button, a dialog will show for asking you backup current BIOS. Click Yes for BIOS backup and refer to the Backup BIOS procedure; or click No to skip this procedure.
TZ7 7 X E3 / TZ7 5 X E3 BIOScreen Utility (Optional) This utility allows you to personalize your boot logo easily. You can choose JPG or BMP as your boot logo so as to customize your computer. Please follow the following instructions to update boo logo: 1. Load Image:Choose the picture as the boot logo. 2. Transform:Transform the picture for BIOS and preview the result. 3. Update Bios:Write the picture to BIOS Memory to complete the update.
Motherboard Manual CHAPTER 6: USEFUL HELP 6.1 DRIVER INSTALLATION NOTE After you installed your operating system, please insert the Fully Setup Driver DVD into your optical drive and install the driver for better system performance. You will see the following window after you insert the DVD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you insert the Driver DVD, please use file browser to locate and execute the file SETUP.
TZ7 7 X E3 / TZ7 5 X E3 6.2 EXTRA INFORMATION CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3.
Motherboard Manual 6.3 AMI BIOS POST CODE Checkpoint 03 04 05 06 07 08 C0 C1 C2 C5 C6 C7 0A 0B 0C 0E 13 20 24 2A 2C 2E 31 33 44 Description Disable NMI, Parity, video for EGA, and DMA controllers. Initialize BIOS, POST, Runtime data area. Also initialize BIOS modules on POST entry and GPNV area. Initialized CMOS as mentioned in the Kernel Variable "wCMOSFlags." Check CMOS diagnostic byte to determine if battery power is OK and CMOS checksum is OK.
TZ7 7 X E3 / TZ7 5 X E3 Checkpoint 37 38 39 3A 3B 3C 40 52 60 75 78 7C 84 85 87 8C 8D 8E 90 A1 A2 A4 A7 A9 AA AB AC B1 00 Description Displaying sign-on message, CPU information, setup key message, and any OEM specific information. Initializes different devices through DIM. See DIM Code Checkpoints section of document for more information. USB controllers are initialized at this point. Initializes DMAC-1 & DMAC-2. Initialize RTC date/time. Test for total memory installed in the system.
Motherboard Manual 6.4 TROUBLESHOOTING Probable There is no power in the system. Power LED does not shine; the fan of the power supply does not work 2. Indicator light on keyboard does not shine. System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running. 1. Solution 1. 2. 3. Using even pressure on both ends of the DIMM, press down firmly until the module snaps into place. System does not boot from a hard disk 1.
TZ7 7 X E3 / TZ7 5 X E3 This page is intentionally left blank.
Motherboard Manual APPENDIX: SPEC IN OTHER LANGUAGES GERMAN Spezifikationen Unterstützt Execute Disable Bit / Enhanced Intel Socket 1155 CPU Intel Core i7 / i5 / i3 / Pentium / Celeron Prozessoren Chipsatz Hyper Threading Intel Z75 (TZ75XE3) Umgebungskontrolle, Bietet die häufig verwendeten alten Super Hardware-Überwachung E/A-Funktionen.
TZ7 7 X E3 / TZ7 5 X E3 Spezifikationen CPU-Lüfter-Sockel x1 System-Lüfter-Sockel x2 "CMOS löschen"-Sockel x1 USB2.0-Anschluss x2 USB3.0-Anschluss x1 Verbraucher-IR Anschluss x1 Serieller Anschluss x1 CPU-Lüfterstromversorgungsanschluss (mit Smart Fan-Funktion) System-Lüfter-Stromversorgungsanschluss Jeder Anschluss unterstützt 2 Fronttafel-USB2.0-Anschlüsse Jeder Anschluss unterstützt 2 Fronttafel-USB3.
Motherboard Manual FRENCH SPEC Prend en charge les technologies d'exécution de bit Socket 1155 UC Processeurs Intel Core i7 / i5 / i3 / Pentium / Celeron Chipset Super E/S de désactivation / Intel SpeedStep® optimisée/ d'architecture Intel 64 / de mémoire étendue 64 / de virtualisation / Hyper Threading Intel Z77 (TZ77XE3) Intel Z75 (TZ75XE3) IT8728 Initiatives de contrôle environnementales, Fournit la fonctionnalité de Super E/S Moniteur de matériel patrimoniales la plus utilisée.
TZ7 7 X E3 / TZ7 5 X E3 SPEC Connecteur Audio du panneau avant x1 Embase de ventilateur UC x1 Embase de ventilateur système x2 Embase d'effacement CMOS x1 Connecteur USB2.0 x2 Connecteur USB3.0 x1 Prend en charge la fonction audio du panneau avant Alimentation électrique du ventilateur UC (avec fonction de ventilateur intelligent) Alimentation électrique du ventilateur système Chaque connecteur prend en charge 2 ports USB2.0 de panneau avant Chaque connecteur prend en charge 2 ports USB3.
Motherboard Manual ITALIAN SPECIFICA Supporto di Execute Disable Bit / Enhanced Socket 1155 CPU Processore Intel Core i7 / i5 / i3 / Pentium / Celeron Chipset Tecnologia Extended Memory 64 / Tecnologia Virtualization / Hyper Threading Intel Z77 (TZ77XE3) Intel Z75 (TZ75XE3) Funzioni di controllo dell’ambiente: IT8728 Super I/O Intel SpeedStep® / Architettura Intel 64 / Fornisce le funzionalità legacy Super I/O Monitoraggio hardware usate più comunemente.
TZ7 7 X E3 / TZ7 5 X E3 SPECIFICA Collettore ventolina CPU x1 Collettore ventolina sistema x2 Collettore cancellaz ione CMOS x1 Connettore USB2.0 x2 Connettore USB3.0 x1 Alimentazione ventolina CPU (con funzione Smart Fan) Alimentazione ventolina di sistema Ciascun connettore supporta 2 porte USB2.0 pannello frontale Ciascun connettore supporta 2 porte USB3.
Motherboard Manual SPANISH Especificación Admite Bit de deshabilitación de ejecución / Intel Socket 1155 CPU Procesador Intel Core i7 / i5 / i3 / Pentium / Celeron SpeedStep® Mejorado / Intel Architecture-64 / Tecnología Extended Memory 64 / Tecnología de virtualización / Hyper Threading Conjunto de Intel Z77 (TZ77XE3) chips Súper E/S Intel Z75 (TZ75XE3) IT8728 Iniciativas de control de entorno, Le ofrece las funcionalidades heredadas de Monitor hardware uso más común Súper E/S.
TZ7 7 X E3 / TZ7 5 X E3 Especificación Cabecera de borrado de CMOS X1 Conector USB2.0 X2 Cada conector soporta 2 puertos USB2.0 frontales Conector USB3.0 X1 Cada conector soporta 2 puertos USB3.
Motherboard Manual PORTUGUESE ESPECIFICAÇÕES Suporta as tecnologias Execute Disable Bit / Socket 1155 CPU Processador Intel Core i7 / i5 / i3 / Pentium / Celeron Chipset o Super I/O / Extended Memory 64 / Virtualization / Hyper Threading Intel Z77 (TZ77XE3) Intel Z75 (TZ75XE3) IT8728 Especificaçã Enhanced Intel SpeedStep® / Intel Arquitecture -64 Iniciativas para controlo do ambiente Proporciona as funcionalidades mais utilizadas em termos da especificação Super I/O.
TZ7 7 X E3 / TZ7 5 X E3 ESPECIFICAÇÕES Conector de áudio frontal x1 Conector da ventoinha da CPU x1 Conector da ventoinha do sistema x2 Conector para limpeza do CMOS x1 Conector USB2.0 x2 Conector USB3.0 x1 Conector de IR do consumidor x1 Porta série x1 Conector de saída S/PDIF x1 Conector de alimentação x1 Suporta a função de áudio no painel frontal Alimentação da ventoinha da CPU (com a função Smart Fan) Alimentação da ventoinha do sistema Cada conector suporta 2 portas USB2.
Motherboard Manual POLISH SPEC Obsługa Execute Disable Bit / Enhanced Intel Socket 1155 Procesor Procesor Intel Core i7 / i5 / i3 / Pentium / Celeron Chipset SpeedStep® / Intel Architecture-64 / Extended Memory 64 Technology / Virtualization Technology / Hyper Threading Intel Z77 (TZ77XE3) Intel Z75 (TZ75XE3) Gniazda DDR3 DIMM x 4 Moduł pamięci DDR3 z trybem podwójnego kanału Pamięć Maks.
TZ7 7 X E3 / TZ7 5 X E3 SPEC Złącze główkowe wentylatora systemowego x2 Zasilanie wentylatora systemowego Złącze główkowe kasowania CMOS x1 Złącze USB2.0 Złącze USB3.0 x2 x1 Złącze Konsument IR x1 Port szeregowy x1 Złącze wyjścia S/PDIF x1 Złącze zasilania (24 pinowe) x1 Złącze zasilania (8 pinowe) x1 Klawiatura PS/2 x1 Port HDMI x1 Port VGA x1 Back Panel Port DVI x1 Port LAN x1 Port USB2.0 x4 I/O Wymiary płyty Port USB3.
Motherboard Manual RUSSIAN СПЕЦ CPU (центральн ый Поддержка технологий Execute Disable Bit / Socket 1155 Процессор Intel Core i7 / i5 / i3 / Pentium / Celeron / Extended Memory 64 Technology / технологии виртуализация / Hyper Threading процессор) Набор Enhanced Intel SpeedStep® / Intel Architecture-64 Intel Z77 (TZ77XE3) микросхем Intel Z75 (TZ75XE3) Модуль памяти с двухканальным режимом DDR3 Слоты DDR3 DIMM x 4 Основная Максимальная ёмкость памяти 32 ГБ память Каждый модуль DIMM поддерживает 51
TZ7 7 X E3 / TZ7 5 X E3 СПЕЦ Источник питания для вентилятора центрального Контактирующее приспособление вентилятора центрального процессора x1 Контактирующее приспособление вентилятора системы x2 процессора (с функцией интеллектуального вентилятора) Источник питания для вентилятора системы Открытое контактирующее Задняя приспособление CMOS x1 USB2.0-разъём x2 USB3.
Motherboard Manual ARABIC اﻟﻤﻮاﺻﻔﺎت وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ Execute Disable Bit / Enhanced Intelﺗﺪﻋﻢ ﺗﻘﻨﻴﺎت Socket 1155 Intel Core i7 / i5 / i3 / Pentium /ﻣﻌﺎﻟﺠﺎت ﺑﺘﺮدد یﺼﻞ إﻟﻰ Celeron SpeedStep® / Intel Architecture-64 / Extended Memory 64 Technology / Virtualization Technology / Hyper Threading )Intel Z77 (TZ77XE3 ﻣﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ )Intel Z75 (TZ75XE3 ﻣﺰدوﺝﺔ اﻟﻘﻨﺎةDDR3وﺣﺪة ذاآﺮة اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ ﺳﻌﺎت DDR3 1600 / 1333 / 1066ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻣﻦ ﻥ
TZ7 7 X E3 / TZ7 5 X E3 اﻟﻤﻮاﺻﻔﺎت ﻣﻨﻔﺬ اﻟﺼﻮت اﻷﻣﺎﻣﻲ ﻋﺪد 1 یﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ وﺹﻠﺔ ﻣﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰیﺔ ﻋﺪد 1 ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ ﻣﻊ وﻇﻴﻔﺔ Smart Fan وﺹﻠﺔ ﻣﺮوﺣﺔ اﻟﻨﻈﺎم ﻋﺪد 2 ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ اﻟﻨﻈﺎم وﺹﻠﺔ ﻣﺴﺢ CMOS ﻋﺪد 1 ﻣﻨﻔﺬ USB2.0 ﻋﺪد 2 یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ ﻓﺘﺤﺘﻲ USB2.0ﺑﺎﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ ﻣﻨﻔﺬ USB3.0 ﻋﺪد 1 یﺪﻋﻢ آﻞ ﻣﻨﻔﺬ ﻓﺘﺤﺘﻲ USB3.
Motherboard Manual JAPANESE 仕様 Execute Disable Bit / Enhanced Intel SpeedStep® / Socket 1155 CPU Intel Core i7 / i5 / i3 / Pentium / Celeron プロ セッサ Intel Architecture-64 / Extended Memory 64 Technology / Virtualization Technology / Hyper Threadingをサポートします Intel Z77 (TZ77XE3) チップセット メインメモリ Super I/O Intel Z75 (TZ75XE3) DDR3 DIMMスロット x 4 デュアル チャンネルモードDDR3メモリモジュール 最大メモリ容量32GB DDR3 1066 / 1333 / 1600 をサポート 各DIMMは 512MB/1GB/2GB/4GB/8GB DDR3 DDR3 1866(OC) / 2133(OC) / 2400(OC) をサポート をサポート 登録済みDIMMとEC
TZ7 7 X E3 / TZ7 5 X E3 仕様 システムファンヘッダ x2 CMOSクリアヘッダ x1 USB2.0コネクタ x2 システムファン電源装置 各コネクタは2つのフロントパネルUSB2.0ポートをサポ ートします USB3.0コネクタ x1 各コネクタは2つのフロントパネルUSB3.0ポートをサポ ートします 消費者IRコネクタ x1 シリアルポート x1 S/PDIFアウトコネクタ x1 電源コネクタ(24ピン) x1 電源コネクタ(8ピン) x1 PS/2キーボード x1 HDMIポート x1 VGAポート x1 背面パネル DVI-Dポート x1 I/O LANポート x1 USB2.0ポート x4 USB3.