User's Manual

46 Cardiac Airbag Technical Manual
[Follow-Up] - The Follow-up Assistant (FAST) is incorporated
into the programmer applications to provide a user-defined
system guided follow-up. The “guided” follow-up function was
developed to allow consistent and quick actions by the user
through a single command.
[Parameter] - The [Parameter] window serves for programming
all parameters for sensing, detection and therapies.
[Status] - The [Status] window displays information on the
interrogated ICD and the connected lead system. The window
grouped under two tabbed sections: Status and Measurement
Trend.
[Holter] - The [Holter] functions are grouped within the following
tabs: Episode List and Holter Configuration. Episode List
displays a list of all stored episodes. Holter Configuration
contains Holter configuration and a function for modifying the
date and time setting of the programmer. Holter Time Setting
clears the date and time from the implant memory and sets the
internal clock of the implant to the time of the programming
is
wing tabs:
t. Each of
computer via a serial
0 software which is not be
atient and
their physician.
Reset: To re-initialize the ICD. This feature is locked out by
code, if it is necessary to reset the ICD, please contact your
BIOTRONIK representative.
device.
[Tests] - The [Tests] are grouped within the follo
Amplitude / Impedance, Threshold, and DFT Tes
these tabs activates windows for various tests used at implant
and follow-up procedures.
[Export] - The [Export] selection is used to copy the complete
database of the implant to a separate
interface and BIOTRONIK’s CDM 300
available in the US.
[Options] - The [Options] window contains the following three
tabs:
Options: for manually reformation of the high voltage capacitors
contained within the ICD, to activate Home Monitoring, and for
programmer control functions.
Patient Data: For storing information regarding the p