Technical Manual
Table Of Contents
- Table of Contents
- 1 Introduction
- 2 Safety during Use
- 3 Getting Started
- Device Overview
- Symbols on the Device
- BIOwand Status Indicator (LED)
- Power Adapter On/Off Light Indicator (LED)
- Bluetooth Status Indicator (LED)
- Telemetry Status Indicator on the Programming Head
- Setting up the Device
- Connecting the Programming Head (BIOwand PGH)
- Connecting the Power Adapter and Switching on the Device
- Establishing a Connection to the BIOwand App
- Establishing a Connection to a stimulator
- Error Resolution
- 4 Appendix
Getting Started
Error Resolution
14
Error Resolution
When the provided power adapter is connected, the device performs a self-test. If the self-test is not
successful, the BIOwand status indicator (LED) lights up orange continuously. The following errors can
lead to an unsuccessful self-test:
Error Error resolution
No programming head (BIOwand PGH) is
connected.
1. Check whether the programming head
(BIOwand PGH) has been correctly
connected.
2. Connect a programming head (BIOwand
PGH).
An internal error has occurred. 1. To switch off the device, pull the plug of the
power adapter out of the device.
2. To switch on the device, reinsert the plug of
the power adapter into the device.
The device performs a self-test again. If this self-
test is once more unsuccessful and the BIOwand
status indicator (LED) lights up orange continu-
ously, return the device to BIOTRONIK.