User Manual

CardioMessenger II-S Operate
13
Operate
The CardioMessenger
does not have an on/off
switch. After connecting it,
it is ready for use as soon
as the operating light
illuminates green.
It is intended for continuous operation and
should remain connected at all times,
especially at night.
The CardioMessenger automatically receives
the information from your implant and
transmits it to the BIOTRONIK Service Center.
Note
It indicates a malfunction if the operating
light illuminates yellow or does not light up
at all. Details on "Debugging" can be found
on page 16.
Check lights
Check once a day whether either of the two
lights is illuminated.
Usually the operating
light illuminates green.
The call back light is
not illuminated.
Note
The functions of your implant are not
affected at any time by the
CardioMessenger, irrespective of the
illumination or blinking of the lights.
See the next page for details on the subject
"Call back function".
CardioM essenger_II-S_en.book Page 13 Tuesday, May 6, 2008 1:11 PM