User Manual

CardioMessenger II-S Operate
15
Turn off the call back light
To turn off the call back light, disconnect the
CardioMessenger briefly from the main supply.
1. Pull the DC plug at the end of the electricity
cable out of the port on the left side of the
CardioMessenger.
Both lights will turn off.
2. Connect the DC plug to the port again.
The CardioMessenger performs the self-test.
Afterwards, the operating light will illuminate
green and the call back light will no longer be
blinking.
Note
Details on "Connection" can be found on
page 9.
Switch off the system
The CardioMessenger does not have an on/off
switch. To turn off the CardioMessenger,
disconnect it from the main supply.
1. Remove the power plug from the wall
outlet.
The operating control lamp will turn out. The
CardioMessenger is switched off.
CardioM essenger_II-S_en.book Page 15 Tuesday, May 6, 2008 1:11 PM