User Manual

19 Docking Station
Internal Printer
The ICS 3000 includes a high-resolution, graphics-
capable thermal printer. The device prints on ICS 3000
thermal folding paper (see „Scope of Delivery“ on
page 39).
Note: The thermal paper printouts are moisture-sensitive
and fade when exposed to strong sunlight. Make
copies for permanent documentation.
• To open the paper tray, lift the lever below the
recessed handle on the paper tray and pull out the
tray.
• To insert paper: Cut a triangle from the top sheet of
the new paper, and push the cut sheet into the feed
slot of the printer until it comes completely out of the
paper discharge slot. Close the paper tray cover.
• Insert the paper tray.
Note: The printer is ready for operation only when the paper
tray has been inserted.
• Using the numbered buttons, switch on the printer
and select the printing speed in mm/s.
• Pressing the button at the top left stops the printout of
the ECG.
• Press the button with the triangles to advance the
paper to the beginning of the next page.
The feed mechanism automatically advances the
paper to the next tear-off edge.