User Manual

32 Care and Maintenance
Care and Maintenance
WARNING! Perform maintenance tasks only when the device is
unplugged.
Changing the
rechargeable
battery
Depleted rechargeable batteries can be replaced;
contact BIOTRONIK.
Caution! After a battery change, a complete battery
maintenance cycle must be carried out so that the
rechargeable battery reaches its full capacity and this
can be displayed. Even if a full or partially charged
battery is used, the maintenance cycle must be
carried out (see the technical manual for the
software).
Cleaning and Disinfection
To clean the device and the programming head, use a
cloth moistened with a mild soap solution, alcohol, or
other sterile solution (comply with the manufacturer’s
recommendations concerning dilution before use).
Caution! Never use organic solvents such as ether or acetone
to clean the device. Always ensure that no liquids can
penetrate the device.
• Be careful not to allow any liquid to enter the housing
during cleaning.
• Do not exert any pressure on the screen. Even slight
pressure over a large area can irreparably damage the
touch screen.
• Disinfect the device with a mixture of 70% isopropanol
and 30% water, or use Lysoformin 3000 (concentration
= 2% , application time = 15 min).