Warranty

BioWaveGO User’s Manual
BioWave Corporation80
7.1 Maintenance, Cleaning and
Storage Instructions
One of the design features of the BioWaveGO
®
System is that there is no
maintenance required by the user, other than keeping the stimulator and leadwire
cable clean and stored in the proper environment, as described below. All repair and/
or service to the BioWaveGO
®
stimulator must be done by BioWave Corporation.
Any opening or disassembly of the stimulator immediately voids the warranty of the
BioWaveGO
®
stimulator.
• The stimulator should not be serviced while attached to the user.
• The stimulator does not require frequent cleaning if it is handled and used with
clean hands. If it needs to be cleaned, wipe the stimulator with a damp cloth.
• Keep food and liquids away from the stimulator, leadwire cable, Pain Relief Pads
and AC Charger. Never submerge the stimulator, leadwires, Pain Relief Pads or
AC Charger in water or any other liquid. Never pour or spray any liquid onto the
stimulator, leadwire cable or Pain Relief Pads.
• The user should ensure that the stimulator, leadwires, Pain Relief Pads and AC
Charger are dry prior to using them. If the stimulator, leadwires, Pain Relief Pads
or AC Charger do become wet, DO NOT USE them. Please contact BioWave for
technical support at 1-877-BIOWAVE ext 2.
7. Maintenance, Cleaning and
Storage Instructions