BioWave Corporation 89
AC Charger
The stimulator must only be used with the universal AC Charger provided:
5V DC, 1.0A, Power Output: 5W, Input Voltage: 90-264 VAC, Frequency 50-60Hz
Cord Plug 2.1mm I.D. x 5.5mm O.D. x 9.5mm Female. CE and UL Mark Listed.
Leadwire Cable
Rating complies with 21 CFR Part 898
(performance standards for Pain Relief Pad leadwires)
BioWave Noninvasive Pain Relief Pads
BioWave Noninvasive Pain Relief Pads are of a silver/carbon construction with a
pre-applied hydrogel and are cleared for marketing under 510(k) numbers K052289,
K072123 and K152437. BioWave Noninvasive Pain Relief Pads are a type BF applied
part complying with IEC 60601-1.
Transport and Storage
Temperature limits: -20º C to +60º C
Humidity: 45 – 85% Relative Humidity
Pressure: Equivalent to Altitude of 10,000 feet
BioWaveGO meets IEC 60601-1, IEC 60601-1-2, IEC 60601-1-11 and IEC 60417-5333
Risk of injury if used improperly.
The stimulator can produce physiological effects.
The Bluetooth word, mark and logos are owned by the Bluetooth SIG, Inc. and any use
of such marks by BioWave Corporation is under license. Communication between the
BioWaveGO Device and the Smartphone is via Bluetooth.