Warranty
BioWave Corporation 95
9.TechnicalSpecications
The BioWaveGO Neurostimulator is intended for use in an electromagnetic environment in which radiated
RF disturbances are controlled. The customer or user of the BioWaveGO Neurostimulator can help prevent
electromagnetic interference by maintaining a minimum distance listed in meters below, between portable
and mobile RF communications equipment (transmitters) and the BioWaveGO Neurostimulator based on
the maximum output power of the communications equipment.
0.0350.058
0.01
Watts (W)
150 kHz to 80 MHz
d = 0.58 √P
80 MHz to 800 MHz
d = 0.35 √P
Recommended Separation Distances Between Portable and Mobile RF
Communications Equipment and the BioWaveGO Neurostimulator
800 MHz to 2.5 GHz
d = 0.7 √P
Rated Maximum
Output Power
of Transmitter
in Watts (W)
Separation Distance (d) in Meters (m)
According to Frequency of Transmitter
0.07
0.110.18
0.1
0.22
0.350.58
1
0.7
1.11.8
2.2
3.55.8100
7.0
For transmitters rated at a maximum output power not listed above, the recommended separation distance
(d) in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P
is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTES:
• At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
• These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
10