Specifications

Any question, please call CUSTOMER SERVICE 1-800-454-2588 Model: EHUV-10-03
11
HOW TO FILL THE WATER TANK:
Press the POWER button on the front panel to off position. Once the unit has come to a complete
stop, turn off the Main Power Switch located on the left side near the top. Remove the power plug
from the wall power outlet with dry hands.
Press the “unlock release” on the back of the unit by pulling up. You will hear it “unlock”.
UNLOCK RELEASE
(Water tank and back panel colour should be black in this
model no.: EHUV-10-03)
Using two hands: One hand holding the “unlock release” up, place your other hand below the bottom of
the water tank, and gently pull it out.
WATER TANK HALFWAY SLID OUT
(Water tank and back panel colour should be black in this
model no.: EHUV-10-03)
Only remove the tank when the water level is low and wipe out any residual pollutants with a damp
cloth, before re-filling.
The water tank can be filled several different ways:
NOTE: Observe the minimum water level mark and maximum water level when filling
the water tank.
1. Remove the tank and fill directly from the kitchen sink with cold clean water. Please note it is a big
water tank of 25 pints capacity. Please be careful with the weight when transport the water tank
after it is filled with water.
2. Leave the tank half-way or one-third slid out and fill with the kitchen sink spray accessory, or
garden hose.
3. Use a water pitcher to fill the tank pulled out one-third or half-way slid out.
4. Open the top cover of the ice compartment; use a water pitcher to pour water from ice
compartment draining down to the water tank. Please make sure you do not fill water above the
max water level mark to avoid water overflowing.