Assembly Instructions

ASSEMBLY INSTRUCTIONS

Bulb

Screw*3pcs

B → A → C → D →BULBS → E → SCREW

1. Carefully unpack and identify all parts referring to the illustration for parts identification.

2. Turn power to the installation point OFF.

3. Thread the round tube (B) into the nipple inside of the fixture body (A), then round tube (C)

into the protruding nipple at top of the round tube (B), then canopy (D) onto the protruding

nipple at top of the round tube (C) until tighten.

4. Install proper bulbs (not provided) to sockets referring to the markings and/or labels on the

fixture for maximum wattage.

5. Unthread the orb Screws from caps of the fixture body (A), then insert the top neck of the

glass orbs (E) into the caps and secure them with the orb screws. Do not over tighten the

screws.

6. Referring to the installation instruction with the product for the wiring and installation.

7. Restore power to the installation point ON. Retain this sheet for future reference.