Installation & Assembly

STEP 1 - Figure 1

Begin assembly by turning over the

Bench (F) and placing it on a

smooth clean surface to protect from

scratching. Next attach the Casters

(A) into the corners of the Bench (F)

and secure with 4 Medium Screws

(D) each.

STEP 2 - Figure 2

Return the Bench (F) to its upright

position. Attach the Handle Supports

(B) to the sides of the Bench (F) with

2 Long Screws (E) each.

STEP 3 - Figure 3

Finally slide the Bars (G) in between

the Handle Supports (B) and secure

with 1 Short Screw (C) per side.

HARDWARE LIST

A (4) Casters

B (4) Handle Supports

C (4) Short Screws

D (16) Medium Screws

E (8) Long Screws

PARTS LIST

F (1) Bench

G (1) Bars

QTYPART

HARDWARE QTYPART HARDWARE

4A 16B

CARE & MAINTENANCE

The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,

as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.

FIGURE 2

FIGURE 3

FIGURE 1

GRANITE KITCHEN ISLAND

Page 1 of 1

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all

components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.