ASSEMBLY INSTRUCTIONS TEAK SECTIONAL LOUNGER CHAIR WITH CUSHIONS CUSTOMER SERVICE INFORMATION Please do not return to the store. If any pieces are missing call our toll free number for replacement parts. For faster service, have the style number handy when calling.
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the chair. 2. To avoid damage, assemble the chair on a non-abrasive surface such as carpet. 3. Make sure all bolts tightly fastened before the chair is used. 4. This chair is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. A Phillips screwdriver is necessary for assembly. = It's not included in hardware list.
STEP Attach the back support (B), Apron (D) and seat (C) to the right side frame (AL). Next, attach the left side frame (A2) onto per-assembled of step 1. Secure using 2 1/4" bolt (E) and 1 1/2" bolts (F) as shown. STEP 3 STEP 4 Repeat step 2 procedure to secure other side frame. Make sure all parts are correctly connected and tighten all bolts using screwdriver, Install the cushions. THE LOUNGER IS NOW READY FOR USE.