Assembly Instructions

ManualsBrandsBirch Lane™ Heritage ManualsBedsCassandra Upholstered Standard Bed

Model:

Lot No:

Date of Purchase:

ADULT ASSEMBLY REQUIRED

If you are missing any parts or have any quesons regarding assembly,

do not return this item to the retailers store. Please call our toll-free, customer

service number and have this assembly manual open to the parts list ready to

provide the model name, number and part name or number.

This product may contain small components, please ensure they are kept away

from small children.

8-8

Aach Center Support Slat (3) and Support Slats (4) to Side Panels (1)

using Bolt (C), Spring Washer (E) and Washer (D).

Tighten using provided Allen Key (H).

WARNING:

BED

QUEEN

Summary of content (4 pages)

PAGE 1
8 Model: Lot No: Date of Purchase: Attach Center Support Slat (3) and Support Slats (4) to Side Panels (1) using Bolt (C), Spring Washer (E) and Washer (D). Tighten using provided Allen Key (H). BED QUEEN C ADULT ASSEMBLY REQUIRED If you are missing any parts or have any questions regarding assembly, do not return this item to the retailers store.
PAGE 2
PARTS Avoid using sharp objects such as a knife to cut open packing as you may accidentally damage the upholstery. 1. Side Rails 2x 2. Footboard 1x 3. Center Support Slat 1x 4. Support Slat 2x 5. Center Support Leg 5x 6. Center Slat Support Bracket 2x 7. Slat Support Bracket 4x 8. Right Side Rail Bracket 2x 9. Left Side Rail Bracket 2x 10. Legs 2x 2-8 7 11. Headboard 1x 12.
PAGE 3
HARDWARE 5 6 Avoid using sharp objects such as a knife to cut open packing as you may accidentally damage the upholstery. Attach Center Support Leg (5) to Support Slat (4) and Center Support Slat (3) by hand turning threaded post into insert nut. Attach Headboard Left Leg (12) and Headboard Right Leg (13) to Headboard (11) using Bolt (I), Spring Washer (E) and Washer (D). Tighten using provided Allen Key (H). 11 A. M8x60mm Bolt 2x B. M8x25mm Bolt 8x C. M8x20mm Bolt 30x D. M8x22mm Washer 44x E.
PAGE 4
ASSEMBLY INSTRUCTIONS Do not fully tighten bolts until assembly is complete. Attach Legs (10) to Footboard (2) using Bolt (A), Spring Washer (E) and Washer (F). Tighten using provided Allen Key (H). 3 Secure Right Side Rail Bracket (8) and Left Side Rail Bracket (9) to Side Rails (1) using Screw (G). Tighten using screw driver. 4 Attach Slat Support Bracket (7) and Center Slat Support Bracket (6) to Side Rails (1) using Bolt (C), Spring Washer (E) and Washer (D). Tighten using provided Allen Key (H).