Installation & Assembly

Fx18pcs

Gx18pcs

B → A → C → D → E → F → G

1. Carefully unpack and identify all parts referring to the illustration for parts identification.

2. Turn power to the installation point OFF.

3. Thread the column (B) onto the center coupling at top of fixture body (A),hands tighten until snug.

4. Thread the nipple (C) into the center coupling at bottom of fixture body (A).

5. Pass the center hole of font (D) over the protruding nipple (C) and secure with finial (E). Hand

tighten until snug.

6. Attach the both ends of beads string (F), (G) to the holes on the fixture body (A) and column (B)

as shown.

7. Referring to the installation instruction with the product for the wiring and installation.

8. Install proper bulbs (not provided) to sockets referring to the markings and/or labels on the fixture

for maximum wattage.

9. Restore power to the installation point ON. Retain this sheet for future reference.

ASSEMBLY INSTRUCTIONS

PAGE 1
ASSEMBLY INSTRUCTIONS B Fx18pcs A C Gx18pcs D E B→A→C→D→E→F→G 1. 2. 3. 4. 5. 6. 7. 8. 9. Carefully unpack and identify all parts referring to the illustration for parts identification. Turn power to the installation point OFF. Thread the column (B) onto the center coupling at top of fixture body (A),hands tighten until snug. Thread the nipple (C) into the center coupling at bottom of fixture body (A). Pass the center hole of font (D) over the protruding nipple (C) and secure with finial (E).