Installation & Assembly

Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surface with a dry or damp
soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.
Attach Wooden Seat (C) and Box Frame (B) with Csk-Cb Screw (K) by using screwdriver (not included).
Tighten all screws in this step.
Helpful Tip:-Instead of applying downward pressure while reaching under to tighten bolts, have someone sit
in the chair while you tighten the bolts.
Turn the assembled chair to the upright position carefully. Make sure the chair is level, and then securely
tighten all bolts at this stage. Assembly is now completed.
Stand chair up on an even surface and check that it is
balanced. If there is a slight wobble, apply downward
pressure in the corner where a leg is uneven. Keeping
pressure in that corner, tighten all bolts. If balanced, apply
downward pressure evenly in the center and tighten all
bolts. Do not over-tighten beyond hole depth.