Assembly Instructions

BOLT

0.31" x 4.72"

Ø 8mm x 120mm

Qty: 04

WASHER

0.31" x 0.75' x 0.08"

Ø 8mm x 19mm x 2mm

Qty: 08

BOLT

0.31" x 3.15"

Ø 8mm x 80mm

Qty: 04

OPEN WRENCH

K13

Qty: 01

Step 1:

- Assembly Pedestal Foot (3) into Pedestal Pillar (2) by using Open Wrench (D) to tighten Bolts (A) and Washers (B).

Before Starting:

1. Choose a clean, level, spacious assembly area. Avoid hard

surfaces that may damage the product.

2. Always read the instructions carefully before beginning assembly

to ensure that you have all required contents.

3. To prevent choking hazards, keep the packaging material out of

reach of small children

4. Do not over tighten the bolts as this may damage the thread.

5. Use only vendor supplied hardware to assemble. Using

unauthorized hardware could jeopardize the structural integrity of

the item.

6. The use of power tools to aid in assembly is not recommended.

Power tools can damage hardware and split wood.

Hardware and Tools Components:

KEEP INSTRUCTIONS

FOR FUTURE USE

ASSEMBLY REQUIRES

TWO PEOPLE

3 PEDESTAL FOOT x 1

2 PEDESTAL PILLAR x 1

1 TABLE TOP x 1

Page 1 of 2

PAGE 1
Assembly Instructions KEEP INSTRUCTIONS FOR FUTURE USE Hardware and Tools ASSEMBLY REQUIRES TWO PEOPLE Components: BOLT 0.31" x 4.72" Ø 8mm x 120mm A Qty: 04 WASHER 0.31" x 0.75' x 0.08" Ø 8mm x 19mm x 2mm B Qty: C Qty: 08 BOLT 0.31" x 3.15" Ø 8mm x 80mm 04 1 OPEN WRENCH K13 D Qty: 2 3 01 1 TABLE TOP x 1 2 PEDESTAL PILLAR x 1 3 PEDESTAL FOOT x 1 Step 1: Before Starting: 1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product. 2.
PAGE 2
Assembly Instructions Continued Step 2: Step 3: C Step 4: D B 1 - Connect the Leg set to the Table Top (1) by using Open Wrench (D) to tighten Bolts (C) and Washers (B). - If the table doesn't sit level, please adjust the adjustable bolt - Carefully turn the table and stand on its leg. under the legs.