Owner Manual

PIECE QUANTITY

A 1X

B 2X

C 12X

D 12X

12X

WASHER

RING

DESCRIPTION

PICTURE

HEADBOARD

WOODEN LEG

BOLT

Product Dimensions : 65.3"W x 3" D x 53" H

CARE AND MAINTENANCE

Always use felt pads under all articles to prevent discoloration or softening of the

lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills

immediately and avoid common hazards such as hot dishes, harsh solvents and

abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with

water or furniture polish. On highly used surfaces we recommend applying a quality

paste wax which should be used on a regular basis to provide additional protection

from sratches and spills. How often you apply the wax depends on how much wear the

furniture receives.

NOTICE

* Please make sure that you have all parts indicated before you begin assembly of this

item

* This item should be assembled on a soft surface to prevent scratching the finish

during assembly

* This item may require periodic tightening

Part List and Hardware List

PAGE 1
CARE AND MAINTENANCE Always use felt pads under all articles to prevent discoloration or softening of the lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and avoid common hazards such as hot dishes, harsh solvents and abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with water or furniture polish.
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 10 minutes. A C E D C+D+E C+D+E B Step 1 The hardware needed to connect the legs (B) to the headboard (A) are bolt (C), washer (D) and ring (E) Step 2 Attach the two legs (B) to the headboard (A) using 6 bolts (C ), 6 washers and 6 rings.