User's Manual

Power supply
12–36 V DC / 12–28 V AC
Current consumption approx. 70 mA at 24 V AC
Temp. range –4 °F to +140 °F)
Humidity 0 to 90% rel.
Microwave module K-band 24,125 GHz +/– 100 MHz
Transmitting power < 20 dBm
LEDred = Detection activated green = for adjusting functions
Relay output pot. free
change-over contact
Switching voltage 48 V AC/DC
Switching current 0.5 A AC/1 A DC
Switching power
60 VA / 30 W
Protection class
suitable for the application after IP 54
Housing material ABS
Recommended maximum mounting height 13.12'
If after troubleshooting a problem, a satisfactory
solution cannot be achieved, please call
Bircher Reglomat at 800 - 252-1272
from 8am - 5pm central standard time.
You may also visit our website at
www.bircherreglomat.com
DO NOT LEAVE ANY PROBLEMS UNRESOLVED
NEVER SACRIFICE SAFETY FOR ANY REASON
Technical data
M
6
A1
ca. 15 min.
A2
Manual door opening & closing [through the sensor remote]
K
Interferencesavoidance: vibration, wind, rain.
L
on off
F51 9
F61
F62
on
off
suggested module
position > 30°
3
m
(9.84')
>
>
F41
3
m
(9.84')
on
2
1
2
2
= active
= passive
Relay switches on upon detection
R
elay switches off upon detection
Contact
N
Bircher Reglomat reserves the right to change any
information on this document without notice.
For the latest version, please log on to
www.bircherreglomat.com
or call us at 847-952-3730 to request a copy of the
current version.
Disclaimer
O
NO / NC
Amplification level 1 for high mouting or wide field [max. mounting height 13 feet]
high mouting
>
9.84’
(3 m)
Cross traffic optimization
Interference filter
approx. 15 min.
<
<
F42
3 m (9.84')
3 m
(9.84')
<9.84’
(
3 m)
< 9.84’ (3 m)
wide field
off
> 9.84’ (3 m)