User's Manual

1 Installation
1.1 Opening the unit
Opening the unit in its uninstalled state Opening the unit in its installed state
1.2 Wall installation
Open the cover as per section 1.1. Install the sensor as flush as possible to the lower edge of the door drive in order to avoid any
detrimental effects on the active infrared field (presence detector). Mounting screws and a self-adhesive drilling template have been
supplied.
Mounting screws
Install the Jupiter in a stationary (not moving with the door) and horizontal position. Protect the unit against water and
moisture. Do not fit the sensor behind covers. Never touch any electronic and optical components of the sensor.
24
Door drive Sensor Door panel
Active infrared field (presence detector)
1
4
2 3
11
2
2
33
4
4
correct incorrect
Installation with drilling jig
Side view
Enhanced function overview
*Factory default setting
Standard door Pavement Retirement home Wide door Narrow door
+++++
ON ON OFF ON ON
medium medium medium large medium
medium short medium medium medium
OFF medium OFF low low
short, decreasing OFF long, decreasing short, decreasing long, decreasing
medium – large large medium
OFF OFF OFF OFF OFF
short short short short short
adaptive adaptive adaptive adaptive adaptive
max. max. max. max. max.
high 2 high 2 high 2 high 2 high 2
max. max. max. max. max.
Presence detector Motion detector
Direction
recognition
Field size (sensitivity)
Additional output
fall-delay time
Cross-traffic
optimisation
Slow motion
detection (SMD)
Field size, SMD
Digital filter functions
Teach-in time
Teach-in mode
Width of the
detection aera
Sensitivity
Depth of the
detection area
C 1 C 2 C 3 C 4 C 5
Key combi-
nation
Function
*