Installation Guide

Applications
Conduit:
Spike 2000 can be attached to wires,
conduit, gutters, and pipes by using
common hose clamps, Nylon ties or
wire lashings.
Large Flat Surfaces:
Spike 2000 assemblies
can be installed in multiple
rows for wide area coverage.
Curved Surfaces:
Spike 2000 is flexible and can be
installed on curved surfaces (such
as lampposts or signs) by using
common hose clamps, nylon ties
or wire lashings.
Features
Ledges:
Most often, Pest birds congregate on ledges
and roof tops. Install Spike 2000 to keep
birds from creating unsightly messes.
Nesting Areas:
Many times pigeons nest in a specific area
for generations. Preventing nesting takes a
special installation using intertwining vertical
and horizontal rows.
Installation and Applications
Inc.
®
™
envirospike
plastic
Enviro Spike Plastic is a physical bird deterrent designed to
prevent pest birds from landing. The spike is constructed of
durable polycarbonate plastic with U.V. inhibitors. Bird-B-Gone
Spikes are easy to install on ledges, I-beams, parapets, sills, pipes,
roof peaks, signs and anywhere birds are landing and being a
nuisance. It is non-conductive and is the most cost eective,
permanent solution for preventing birds from landing.
Width: 5”
Length: 2’ Sections
Color: Crystal Clear
Packaging: Enviro Spike Plastic is packaged in two foot sections.
Enviro Spike Plastic is a versatile product that can be easily installed onto a variety of surfaces:
IMPORTANT! Observe all cautions and warnings listed in instructions prior to installation.