Owner manual

Installation and Applications
Applications
Bird-B-Gone Spike 2000 is a versatile system that can be easily installed where any bird can roost.
Conduit:
Spike 2000 can be attached to wires,
conduit, gutters, and pipes by using
common hose clamps, Nylon ties or
wire lashings.
Large Flat Surfaces:
Spike 2000 assemblies
can be installed in multiple
rows for wide area coverage.
Curved Surfaces:
Spike 2000 is flexible and can be
installed on curved surfaces (such
as lampposts or signs) by using
common hose clamps, nylon ties
or wire lashings.
Bird-B-Gone Spike 2000 is constructed of durable polycarbonate
plastic with U.V. Inhibitors. It is the most cost effective, permanent
protection against bird landings. It is non-conductive and provides the
widest coverage of any bird deterrent: 7”. Bird-B-Gone Spike 2000 is
easy to install on ledges, beams, parapets, sills, pipes, roof peaks,
chimneys, post piling, signs and any where birds are landing and
being a nuisance.
Spike 2000 will repel all species of birds.
Colors: Spike 2000 is available in White, Tan, Grey, Black, Brown,
Brick Red and Crystal Clear. Custom colors also available.
Packaging: Spike 2000 is packaged with twenty-five 2 ft. sections
per box. One box contains 50ft. of protection.
Features
Ledges:
Most often, Pest birds congregate on ledges
and roof tops. Install Spike 2000 to keep
birds from creating unsightly messes.
IMPORTANT ! Observe all Cautions and Warnings listed in instructions prior to installation.
See reverse side.
Nesting Areas:
Many times pigeons nest in a specific area
for generations. Preventing nesting takes a
special installation using intertwining vertical
and horizontal rows.
Patent # 5,253,444 • Patent # 5,433,029 • Patent Pending
TM
INC.

Summary of content (2 pages)