Specification

ManualsBrandsBird B Gone ManualsOutdoors100 ft. x 7 in. Clear Plastic Bird Spikes

SPECIFICATIONS – BIRD-B-GONE POLYCARBONATE BIRD

SPIKES™

PART 1 – GENERAL

1.1 SUMMARY

A. Design Requirements: Select appropriate size as determined by site

conditions to prevent birds from landing and roosting on specified

surfaces.

1.2 QUALITY ASSURANCE

A. Single Source Responsibility: Furnish products from one manufacturer for

entire project.

B. Country of Origin: Product must be manufactured in the U.S.A.

C. Obtain all technical information from the manufacturer.

D. Utilize labor or Bird-B-Gone Authorized Installers who are

knowledgeable in Bird-B-Gone, Inc. product installations.

E. Installer shall visit the site to gather all information of existing site

conditions.

1.3 SUBMITTALS

A. Product Data: Submit manufacturer’s descriptive literature and product

specifications for each product including catalogs, installation instructions

and other descriptive material.

B. Provide Warranty: Material and installations.

C. Provide Samples: Each type of spike excluding proposed fastening

methods.

D. Provide statement by official indicating that they are a certified installation

company.

1.4 PRODUCT HANDLING

A. Protect Bird-B-Gone, Inc. products from damage before, during and after

the installation.

1.5 PROJECT CONDITIONS

A. Coordination: Furnish samples of system(s) so installation can be

coordinated with existing conditions and within on-site conditions.

B. Visit site and field measure prior to fabrication and delivery of materials.

Summary of content (4 pages)

PAGE 1
SPECIFICATIONS – BIRD-B-GONE POLYCARBONATE BIRD SPIKES™ PART 1 – GENERAL 1.1 SUMMARY A. 1.2 QUALITY ASSURANCE A. B. C. D. E. 1.3 B. C. D. Product Data: Submit manufacturer’s descriptive literature and product specifications for each product including catalogs, installation instructions and other descriptive material. Provide Warranty: Material and installations. Provide Samples: Each type of spike excluding proposed fastening methods.
PAGE 2
1.6 WARRANTY A. Product shall carry a minimum 5 year guarantee against U.V. breakdown. PART 2 – PRODUCTS 2.1 ACCEPTABLE MANUFACTURER Manufacturer: Bird-B-Gone, Inc. Bird-B-Gone Polycarbonate Bird Spike 23918 Skyline Mission Viejo, CA 92692 Tel: 800-392-6915 or 949-472-3122 Fax: 949-472-3116 P.O.C.: Bruce Donoho 2.2 PRODUCT DESCRIPTION A. B. 2.3 Model Designation: 1. Bird-B-Gone Polycarbonate Bird Spike - 3”, 5” or 7” a. Width of Coverage: i. BBG2000-3: 1” – 5” widths ii.
PAGE 3
B. C. 2.4 Construction: Rigid one piece construction, available in 7 standard colors including crystal clear. Adaptation: “Break away” points are located between each set of screw holes. Tin snips, hacksaw, etc. can also be used to cut the product to the desired length. MOUNTING SYSTEMS A. B. C. Wood: Use #8 Wood Screws. For every 2 ft. section of Bird-B-Gone Polycarbonate Bird Spike ten (10) #8 wood screws are required.
PAGE 4
2. 3.4 Space materials in accordance with manufacturer’s recommendations. INSPECTION A. B. Visually inspect Bird-B-Gone Polycarbonate Bird Spike for any signs of poor installation, including loose screws, fasteners and un-removed debris. Immediately correct and repair as necessary.