User's Manual

TX RX Systems Inc. Manual 7-9485-1.7 09/12/11 Page 13
the associated task immediately. The submit and
reload buttons in the bottom left corner allow any
changes you make to the display/interface boxes
to be downloaded to the booster. The submit and
reload buttons act like a trigger sending any
changes you made in the interface boxes to the
channel module as well as updating any displayed
data from the module, but only after the button is
pressed.
LINK AND SETTINGS AREA
This is a user interactive area where the field engi-
neer can program the operating characteristics of
the selected branch as shown in the settings area.
Each pa rameter in the settings a rea can be
changed by clicking in the box and typing in the
new values or by pointing at an arrow to display a
drop down box. Most of the adjustable parameters
have adjustment limitations as applicable. The
parameters are self-explanatory. The changes you
make are only applicable to the selected channel
filter. After you have made changes to the various
parameters press the submit” command interface
button (lower left corner of the screen) in order to
copy the changes into the module itself. The link
portion of the area displays status information for
the branch.
STATUS AREA
The status area of the link tab lets the user know
the status of the module and power amplifier if
applicable. Parameters that can be turned on or off
have a bubble next to the parameter name. A
green bubble indicates the parameter is on and a
black bubble indicates the parameter is off.
Admin Tab
The admin tab allows the user to change the boost-
ers network settings and enable password protec-
tion for the web-based interface program. The
boxes on this page are interactive. To ma ke
changes click inside the box and a cursor will
appear. Refer to Figure 11.
System Tab
The system tab lists the control board software ver-
sions. A customer designated location name can
be recorded. There is also a system logbook avail-
able on this page. Refer to Figure 12.
Figure 12: The Web-Page Interface screen, system tab.