Operation Manual

43
Chapter 3 Installation guidelines
WARNING
This is NOT a consumer device.
It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or
express consent of an FCC licensee to operate this device. You MUST register Class B signal boosters (as defined
in 47 CFR 90.219) online at
www.fcc.gov/signal-boosters/registration. Unauthorized use may result in
significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation.
For CMRS 817-824MHz Applications and American Cellular Applications:
WARNING
This is NOT a consumer device.
It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or
express consent of an FCC licensee to operate this device. Unauthorized use may result in significant forfeiture
penalties, including penalties in excess of $100,000 for each continuing violation.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.
WARNING
This is NOT a consumer device.
It is designed for installation by an installer approved by an ISED licensee.
You MUST have an ISED LICENCE or the express consent of an ISED licensee to operate this device.
For installations subject to Industry Canada certification:
Health and Safety
Bird DAS system is an advanced system and should be handled by skilled staff. Bird is happy to offer training of
installation service providers in the case this is necessary.
Read all available documentation and warnings before handling the equipment. Equipment failures due to
improper handling are normally not covered by the product warranty.
Respect all warning signs on the equipment and in the documentation. Make sure to only operate the equipment
on frequencies allowed to use. Do not modify the equipment.
WARNING
Avoid looking into connected fibers and receptacles.
The laser used in this system is a Class 3b laser that produces invisible infra-red coherent light. Not safe to view
with optical instruments. Always put the protection caps on unused fibers and receptacles.
The equipment contains a Class 3B laser and the equipment is Class 1. Do never look into the Laser beam directly or
indirectly, it is strong invisible light and may cause serious damage to human eyes.
Always use protective caps on fiber and connector ends when fiber is removed from socket. Always clean socket
and connector after a fiber has been removed before it is reconnected.
Make sure to keep passwords and other operational information away from unauthorized personnel.