Manual

Unpacking
and
Inspection
1. Carefully inspect the shipping container for signs
of damage. If damage is noticed, do not unpack
the unit. Immediately notify the shipping carrier
and Bird Electronic Corporation of the damage.
2. If the container is not damaged, unpack the unit.
Save the packing materials for repacking.
3. Inspect all of the components for visual signs of
damage. Immediately notify the shipping carrier
and Bird Electronic of equipment damage or
missing parts.
Site and
Shelter
Requirements
The equipment is not intended for exposed outdoor use, or
use in areas of condensing humidity. The surrounding air
must be free of contaminants or particles that could be
drawn into the air intakes. These load resistors have no in
-
termediate dielectric fluids or coolant and require no cooling
water hookups. The unit should be placed where adequate
space is available for air circulation.
Do not enclose the unit in a small room or closet without
proper ventilation. In small rooms or restricted areas, the
heat given off by the unit may increase the ambient temper-
ature to an unacceptable level for sufficient cooling of the re-
sistors.
Introduction
3