Manual

2. Remove the thermalswitch by unbolting the two
screws holding the bracket to the flow detector
plate.
3. Replace the thermalswitch by reversing the pro
-
cedure in steps 1 and 2.
Customer Service
Any maintenance or service procedure beyond scope of those
provided in this section should be referred to a qualified ser
-
vice center.
All instruments returned for service must be shipped pre
-
paid and to the attention of the Customer Service Group.
Service Group
U.S.A. Sales and Manufacturing
Bird Electronic Corporation
30303 Aurora Road
Cleveland (Solon), Ohio 44139-2794
Phone: [phone]
Fax: [phone]
Sales Offices
For the location of the sales office nearest you, give us a call
or visit our Web site at:
http://www.bird-electronic.com
Preparation for Storage or Shipment
Storage If the unit is to be unused or stored for any length of time,
cover it with a cloth or plastic sheet and store it in a mois
-
ture free, cool, dry place. There is no special preparation for
the unit however; moisture will be the greatest concern.
Storage temperatures should remain -40°C to 70°C (-40°F to
158° F) and the relative humidity percentage should remain
low.
Shipment To ship or return the unit to the factory, first secure all
loose parts such as the swivel flange. Pack and seal se
-
curely in a sturdy wooden box or equivalent, with sufficient
padding to avoid shock damage. If possible, keep the origi
-
nal shipping carton for reshipment.
Bird Model 8578A100GIG Termaline Load Resistor
16