User guide

viii
About This Manual
This manual covers the operating and maintenance instructions for the follow-
ing models:
Changes to this Manual
We have made every effort to ensure this manual is accurate. If you discover
any errors, or if you have suggestions for improving this manual, please send
your comments to our Solon, Ohio factory. This manual may be periodically
updated. When inquiring about updates to this manual refer to the part number
and revision on the title page.
Literature Contents
Start-up Instructions
The Start-up Instructions contains minimum operational steps and the order
they should be performed. Use this manual for reference or if further explana-
tion of any step is required.
Operations Manuals
Chapter Layout
Introduction — Describes the features of the Bird SignalHawk, lists equipment
supplied and optional equipment, and provides power-up instructions.
Vector Network Analysis Settings — Describes how to connect Signal-
Hawk to the user’s system, describes the vector network analyzer measure-
ments, and provides quick start steps for each measurement.
Vector Network Analysis Measurements — Describes the power mea-
surement feature, lists compatible power sensors, describes how to connect
SignalHawk to the user’s system, and provides quick start steps to make power
measurements.
Spectrum Analyzer Settings — Describes how to connect SignalHawk to
the user’s system, describes the spectrum analyzer measurements, and pro-
vides quick start steps for each measurement.
SH-36S SH-361S
SH-362 SH-362S