User guide

83
Chapter 5 Spectrum Analyzer
Measurements
Spectrum Analysis, measuring the power at each frequency in the sweep range,
is the basic measurement. The other measurements interpret that data to pro-
vide useful results.
In the Spectrum Analyzer mode, the following measurements can be used:
 "Spectrum Analysis Measurement" on page 84.
 "Occupied Bandwidth Measurement" on page 85.
 "Channel Power Measurement" on page 87.
 "Adjacent Channel Power Measurement" on page 89.
 "Time Domain (Zero Span)" on page 91.
 "Field Strength Measurement" on page 92.
 "Demodulate Signal" on page 93.
 "Carrier-to-Interference Ratio" on page 94.
 "Out-of-Band and In-Band, Out-of-Channel Spurious" on page 96.
 "Water Fall" on page 72.