User guide

Chapter 6 PC Tool

Bird’s SignalHawk PCTool enables the use of a PC to store measurement data,

transfer it between units, and do individual analysis. Traces can be transferred

from the SignalHawk to the PC and back. One or more saved traces can be opened

and compared. They can also be copied and pasted into other open files, as well

as adding markers or limit lines. In addition, labels can be added and modifications

saved to files.

Computer Requirements

The PC must meet the following minimum requirements:

 Windows 98 or later operating system

 Internet Explorer version 6 or later

 Hard disk with 30 MB of free space

Installing Windows 7 Drivers for the BTG Signal Hawk

1. Download the appropriate version of Microsoft® WMDC (Windows® Mobile

Device Center) from here: http://support.microsoft.com/kb/931937

Note: You will have to go through Microsoft Genuine Advantage val-

idation, either via ActiveX script or manually, whichever your system

allows.

2. Install WMDC on your PC.

Note: Do not follow Microsoft’s instructions.

3. Turn the Signal Hawk on.

4. Connect a standard A/B USB cable from the PC to the SignalHawk.

Note: Windows 7 will try to install drivers but will be unsuccessful.

Ignore its results.

5. From the Start Menu, open the Devices and Printers folder.