User guide

iv
See page 21.
See page 112.
See page 112.
See page 131.
CAUTION
Spectrum Analyzer has a +20 dBm (100 mW) max. RF input.
Exceeding the maximum input will damage the SignalHawk. If unsure of power
levels, measure the test connection with a power sensor before using the
SignalHawk.
CAUTION
SignalHawk test ports are not used for power measurement. Always use an
external sensor!
CAUTION
Always turn off the SignalHawk before connecting or disconnecting a sensor.
CAUTION
Harsh or abrasive detergents, and some solvents, can damage the display unit
and labels.