User guide

72
Trace
Opens a trace submenu with the following options:
Clear Write
Switches off the Average and Max Hold functions.
Max Hold
Holds and displays the highest point of any given sweep until Max Hold is turned
off.
Min Hold
Holds and displays the lowest point of any given sweep until Min Hold is turned
off.
Average
Displays the running average of multiple readings.
Note: This is used to smooth a signal and decrease noise amplitude.
Average Readings
Sets the number of average readings.
Note: The valid range is from 2 to 1024.
Reset Average
Resets the current running average of multiple readings.
Water Fall
See “Water Fall” on page 32.