User guide
SiteHawk Analyzer
SK-4000-TC
} Easy to operate and field ready for first-time, occasional and experienced users.
} FDR (Frequency Domain Reectometry) measurement method results in a highly reliable assessment of
the health of critical components in your system; ultimately providing a “heads-up” before a failure occurs.
} Fault location or DTF mode indicates VSWR or Return Loss levels at each point along the cable and
antenna system length.
} Cable Loss function measures insertion loss of the cable system over a given frequency range.
} One unit covers the entire 85-4000 MHz range!
} USB communication port for connection to storage device and battery charging.
} Color display is clearly visible in direct sunlight.
APPLICATIONS
Worldwide Cellular, PCS/DCS, CDMA, GSM, LTE Protocols,
3G, Broadcast, Government, Tactical Military, Microwave,
Paging, Public Safety, Trunking, WLAN, TETRA, WLL.
MEASUREMENT CAPABILITY
Fast swept measurement.
Seven user-selectable trace capture options:
51,101,201,401,801,1601 or 3201 data points per sweep.
Adjustable pass/fail limit with visual indicator.
16GB of internal ash memory for storing thousands of traces and setups.
X and Y scales and units are user adjustable.
Six markers for either direct or dierence measurements.
Can also measure relative to limit line or recalled trace.
Measurement hold to temporarily store a trace.
Frequency can be set using either Start/Stop or Center/Span frequencies.
Measurement can be Return Loss [dB], Cable Loss [dB],
VSWR [ratio], DTF VSWR [ratio] or DTF Return Loss [dB].
Measurement units can be Return Loss [dB] or VSWR [ratio].
Analyzer_SiteHawk_2012 branding 10/23/2014 2:01 PM Page 1