MSDS

Material Name: MAKROLON 2205 000000
Article Number: 519275
Page: 3 of 6 Report Version: 1.5
6. Accidental release measures
Spill and Leak Procedures
If molten, allow material to cool and place into an appropriate marked container for disposal.
7. Handling and Storage
Storage Temperature:
maximum:
93 °C (199.4 °F)
Storage Period
Not Established
Handling/Storage Precautions
Handle in accordance with good industrial hygiene and safety practices. Wash thoroughly after handling.
Avoid breathing dust.
Further Info on Storage Conditions
Protect equipment (e.g. storage bins, conveyors, dust collectors) with explosion vents.
8. Exposure Controls / Personal Protection
Country specific exposure limits have not been established or are not applicable
Industrial Hygiene/Ventilation Measures
General dilution and local exhaust as necessary to control airborne vapors, mists, dusts and thermal
decomposition products below appropriate airborne concentration standards/guidelines.
Hand Protection
Wear heat resistant gloves when handling molten material.
Eye Protection
safety glasses with side-shields.
Skin and body protection
No special skin protection requirements during normal handling and use.
Additional Protective Measures
Employees should wash their hands and face before eating, drinking, or using tobacco products. Educate
and train employees in the safe use and handling of this product. Purgings should be collected as small flat
thin shapes or thin strands to allow for rapid cooling.
9. Physical and chemical properties
Form:
solid
Appearance:
Pellets