User Manual

Transonic PRO
Heavy Duty Sonic / Ultrasonic Pest Chaser
OPERATION AND USE
This electronic pest chaser is constructed of solid-state electronics that requires no maintenance or
refills.
1. I
nsert barrel plug end of AC adapter cord into the POWER jack, (located on the back of the unit).
Plug the other end into a standard electrical outlet. (For outdoor connection, adapter is to be
connected to a receptacle or convenience outlet of the gasket cover type for use in wet
locations). Move the switch to the ON position. The L.E.D. light will remain illuminated as long
as the unit is operating.
2. Refer to the diagram on the back of the unit (FIG. 1) to select the SOUND VOLUME switch
position and the SOUND PATTERN switch position to customize the desired pest settings.
3. Slide the SOUND VOLUME switch to select which sound level to broadcast.
4. Slide the SOUND PATTERN switch to select which pests to repel. The SOUND PATTERN switch
adjusts the length, interval and pattern of the sound. (See examples below).
Quiet
Sounds that are primarily ultrasonic
(Maximum effective range of 2,000 square feet)
Med
All sounds in the Quiet Mode, plus a variety of sonic sounds.
(Maximum effective range of 3,000 square feet)
Loud
All sounds in the Quiet & Med Modes, plus a loud sonic frequency.
(Maximum effective range of 3,500 square feet)

Summary of content (3 pages)